Primitive Archer

Main Discussion Area => Bows => Topic started by: Jacob Parnell on July 26, 2013, 12:15:29 pm

Title: Bow Backing Question
Post by: Jacob Parnell on July 26, 2013, 12:15:29 pm

Hey

I just finished a burlap backed red oak board bow today.  However, while I was trimming the burlap, I accidently sanded too deep revealing the wood and rounding the edges.
Is this something of concern?
Refer to the picture ;D

Thanks! Jacob

(https://mail-attachment.googleusercontent.com/attachment/u/0/?ui=2&ik=93fd32fd16&view=att&th=1401764f8c8b517b&attid=0.1&disp=inline&safe=1&zw&saduie=AG9B_P9WLFYreFuAbBIeGkMOMbzD&sadet=1374850646781&sads=hAXSnVVQmPjT9uwCRfHZvIn8Wfg&sadssc=1)

Title: Re: Bow Backing Question
Post by: PEARL DRUMS on July 26, 2013, 12:16:14 pm

Cant see the pic, but your fine.

Title: Re: Bow Backing Question
Post by: autologus on July 26, 2013, 12:17:06 pm

The edges should be rounded to prevent lifting a splinter.

Grady

Title: Re: Bow Backing Question
Post by: Jacob Parnell on July 26, 2013, 01:39:40 pm

Stupid picture... thanks guys!