Primitive Archer
Main Discussion Area => Bows => Topic started by: Bohunter0908 on October 20, 2013, 03:05:43 pm
-
Howdy Y'all ,
Just finishing up a board bow and wanting
To get some critique on the tiller
And I know we got some serious tiller
Critics on here so let it rip fellas
Thanks, Bo
LaPorte, TEXAS
-
That looks good to me.
-
Looks good here too. You should post a pic of the front profile with some more specs weight length ect....... :)
-
!
OK here's some spec
67" ntn 1.5" handle 2" at the
Fades 1.75" .mid limb 1/2" tips
Very little bit if set its a pyramid style
Draw weight is about 45#to 50# @ 27"
going for 50# @ 28". I'll try to get
More pics later I have a hard time cause
I'm using a cell phone and the pics are to
Large and not all resize . Thanks for looking and feed
Back.
Thanks,Bo
LaPorte TEXAS
-
Here's pic on the tiller stick
I haven't had a chance to take
Any others yet but I'll get on it
Thanks,Bo
LaPorte TEXAS
-
Well done! Jawge
-
Both limbs are bending well but the lower limb looks a bit stiff to me. In the full draw pic the lower limb is showing more resistance as you draw.
-
Looks like your about te crack yer littlun in the head in the first pic :)
-
WATCH OUT !!!
:laugh: :laugh: :laugh:
Knapper
-
I was thinking the lower limb looked a little
Stiffer but isn't it supposed to be just a little
And in the full draw pic my lil one wasn't as close
As she looks I noticed that too lol
Thanks for looking and for the feed back
Ya got love all the good help and info on this forum
Thanks,Bo
LaPorte TEXAS