Primitive Archer

Main Discussion Area => Bows => Topic started by: Newindian on January 18, 2014, 04:13:35 pm

Title: Simple form for removing twist
Post by: Newindian on January 18, 2014, 04:13:35 pm

This is something I made up this morning thought some of you might find it usefull, just two angled blocks( opposite directions) nailed to a board with enough room on one end to clamp down the bow. Adds some reflex when you use it to

Title: Re: Simple form for removing twist
Post by: Pat B on January 18, 2014, 04:16:26 pm

I use small wood wedges wherever needed along the limb as I heat and clamp a bow to the reflex form.

Title: Re: Simple form for removing twist
Post by: echatham on January 18, 2014, 05:06:02 pm

nice. i do what Pat does, unless theres alot of twist and then i get creative with a crescent wrench and a bucket of water ;)