Primitive Archer
Main Discussion Area => Bows => Topic started by: stone_huntsman on May 22, 2014, 02:19:35 am
-
I've been working on a few bows here lately. I finished this one up here recently. This bow come from a Osage stave that was eat up with bug holes, but I chased a ring until I got to one with only one bug hole mid (on what is now the bottom) limb.
I didn't think it would be a problem so I started removing wood. Once I had it to floor tiller I noticed a tiny splinter starting to form at the bug hole. I put small amount of sinew, I had laying around, over the crack to hold it down. Once the sinew dried I tested it and it seemed to keep the splinter from rising. I had a little sinew left over so I matched up the other limb with a little sinew for aesthetic purposes.
It is a 60", 47# @ 26". I added some decorations and used Dacron B-50 to make the string. It shoots great, I've shot around 200 arrows with it. It's one of the faster shooting bows I've made. I am definitely proud of this one.
-
Interesting artwork!
If you look at the unbraced pic and then the drawn picture it appears as though the upper limb is only really bending at one spot about 6 - 8 inches up from the handle.
-
Interesting artwork!
If you look at the unbraced pic and then the drawn picture it appears as though the upper limb is only really bending at one spot about 6 - 8 inches up from the handle.
If that's the case, all he has to do to fix it is to call it a Molly ;) >:D
Del ;)
-
Mike I can see where you're talking about and I noticed it before. I've actually scraped off some of the wood on the upper limb to get it bending better. I worked on a tillering tree and it looked like I had even bending. I'm gonna check it again though, I may need to take off a little more.
-
Nice job! Congratulations.