Primitive Archer

Main Discussion Area => Flintknapping => Topic started by: JoJoDapyro on October 18, 2014, 05:15:05 pm

Title: Hope it works out
Post by: JoJoDapyro on October 18, 2014, 05:15:05 pm
Tyke and I went out for a little rock hunting adventure today. On the way was a small town, with a small cafe. We stopped in for breakfast. Our server was a 9 year old little girl, helping her mom run the place (gas station, grocery store, cafe). The food was great, and super cheap. We left her a hefty tip for the awesome service. About 15 miles out of town we came to the pit.


From a distance it doesn't look to promising. But once you get up close you realize that there is more stone here than you could use in quite some time. We took a few hours and chipped each promising looking rock. We ended up with a pretty good haul. We only brought back stone that spalled well, and looked waxy and not too coarse. Here is the results.
Title: Re: Hope it works out
Post by: JoJoDapyro on October 18, 2014, 05:17:09 pm
more
Title: Re: Hope it works out
Post by: JackCrafty on October 18, 2014, 05:29:54 pm
NICE!!! :)
Title: Re: Hope it works out
Post by: JoJoDapyro on October 18, 2014, 05:33:57 pm
I'll work some later, if it seems to work well i'll throw some up for trade. I think we have about 400#
Title: Re: Hope it works out
Post by: mullet on October 18, 2014, 07:34:11 pm
That is some good looking rock.
Title: Re: Hope it works out
Post by: JoJoDapyro on October 18, 2014, 07:49:51 pm
It seems to knap well. There is no doubt that it is harder than Obsidian. One issue is that in the dark red bands it doesn't seem to be as hard. I noticed that when we were out there. And while working it your hands get rusty, almost like if you were to sand something rusty. And it is still sharp, took one to the bottom of my foot.  >:D
Title: Re: Hope it works out
Post by: Trapper Rob on October 18, 2014, 09:26:57 pm
Nice looking stone good haul.
Title: Re: Hope it works out
Post by: David_Daugherty on October 18, 2014, 11:24:38 pm
What type of rock is it?
Title: Re: Hope it works out
Post by: Tyke on October 18, 2014, 11:44:59 pm
Wonder stone
Title: Re: Hope it works out
Post by: Sasquatch on October 20, 2014, 05:46:00 pm
Show us a point ;D great haul though.
Title: Re: Hope it works out
Post by: Dalton Knapper on October 20, 2014, 06:50:58 pm
That's the best looking Wonder Stone I have seen and there seems to be mountains of it! Wyoming or Utah? I think it is found mostly in SW Wyoming, but I'm going by memory here and have never been rockhounding in Wyo, just fishing!
Title: Re: Hope it works out
Post by: JoJoDapyro on October 20, 2014, 08:13:05 pm
Tooele County Utah. Near the town of Vernon. West Central Utah.
Title: Re: Hope it works out
Post by: JoJoDapyro on October 20, 2014, 09:13:40 pm
Here is what I have so far. I am not a good knapper. I have huge issues with spalling, and pressure flaking. This stuff is super hard, so pressure flaking seems even more difficult for me. But it is shapable. I need to make an Ishi stick and knap sitting down.
Title: Re: Hope it works out
Post by: TRACY on October 20, 2014, 10:08:34 pm
Nice haul! Will it take heat to knap easier?

Tracy
Title: Re: Hope it works out
Post by: JoJoDapyro on October 20, 2014, 10:22:56 pm
I wish I knew. Mullet is getting a shipment of it . he said he would let me know.
Title: Re: Hope it works out
Post by: Zuma on October 20, 2014, 10:39:04 pm
Nice going. Even if it didn't knap well it is still good lookin and
valuable. Rockhounds love it.
Zuma
Title: Re: Hope it works out
Post by: JoJoDapyro on October 20, 2014, 10:45:02 pm
The big auction site has it for around $50 to $85 for 20#. I want to carve a chess set out of it.