Primitive Archer

Main Discussion Area => Bows => Topic started by: CrazyHorse1969 on March 05, 2015, 03:20:36 pm

Title: Tiller check and a question about tips...
Post by: CrazyHorse1969 on March 05, 2015, 03:20:36 pm

I did not know if I should start a new thread or not, but here it goes.

How is the tiller looking (this is a bendy handle "D" bow)? And I have left the tips sort of thick up to this point. I should take them down more, right?

Title: Re: Tiller check and a question about tips...
Post by: CrazyHorse1969 on March 05, 2015, 03:30:17 pm

Forgot the other pic!

Title: Re: Tiller check and a question about tips...
Post by: PEARL DRUMS on March 05, 2015, 03:33:10 pm

Perfect Scott.

Title: Re: Tiller check and a question about tips...
Post by: CrazyHorse1969 on March 05, 2015, 03:37:23 pm

Thanks, Chris. Should I start taking down the tips? Or, leave them thicker?

Title: Re: Tiller check and a question about tips...
Post by: PEARL DRUMS on March 05, 2015, 03:48:23 pm

Leave them be until you start shooting it. If it zaps your bow hand, thin them down some. They appear to be pretty close to where they should be.

Title: Re: Tiller check and a question about tips...
Post by: CrazyHorse1969 on March 05, 2015, 03:49:51 pm

Great. Thanks. Back to scraping.

Title: Re: Tiller check and a question about tips...
Post by: Roy on March 05, 2015, 03:55:11 pm

Tiller looks very good...

Title: Re: Tiller check and a question about tips...
Post by: Badly Bent on March 05, 2015, 07:11:32 pm

Bending very nicely, tiller looks perfect to me.

Title: Re: Tiller check and a question about tips...
Post by: bubbles on March 05, 2015, 07:26:29 pm

Looks Good. Is that a burn mark on the lower limb?