Primitive Archer

Main Discussion Area => Arrows => Topic started by: bowmo on May 27, 2015, 04:16:03 pm

Title: prairie rose
Post by: bowmo on May 27, 2015, 04:16:03 pm

Left some of the cambium layer on this one to make sure its extra hard to look for...  :laugh:

The nock I made from antler and the tip I just came up with yesterday. It's a 223 casing with the end cut off and a screw dropped into it and held in by the taper. Fits in there perfectly. Dropped in a little super glue to encourage it to stay put, but really there's no place for it to go once its glued to the shaft.

(http://i2.photobucket.com/albums/y40/wakolbinger/11255510_10153368673008524_2248831858592949762_o.jpg)

(http://i2.photobucket.com/albums/y40/wakolbinger/10379825_10153368673173524_4197047129816818364_o.jpg)

(http://i2.photobucket.com/albums/y40/wakolbinger/11270302_10153368673278524_7860152437665247785_o.jpg)

Title: Re: prairie rose
Post by: tallpine on May 27, 2015, 10:54:32 pm

Good thinking, that's got to be the nicest homemade field point I have seen

Title: Re: prairie rose
Post by: bowmo on May 27, 2015, 11:04:40 pm

Thanks! I was rather pleased with myself over this one.

Title: Re: prairie rose
Post by: Badly Bent on May 29, 2015, 11:40:20 pm

Nice arrow, the tip and antler nock add to the personalized and custom look of the arrow.

Title: Re: prairie rose
Post by: neuse on May 30, 2015, 08:30:32 am

Very nice.

Title: Re: prairie rose
Post by: Halcon rojo on May 30, 2015, 12:58:21 pm

That is a really cool.

Title: Re: prairie rose
Post by: TimothyR on June 03, 2015, 12:22:08 am

Verry cool! Talk about exploding tips >:D  love the nocks too.