Primitive Archer
Main Discussion Area => Bows => Topic started by: Whiskeyjet on March 24, 2017, 12:25:42 pm
-
Well I was taking a break from tillering a red oak BB that was taking a lot of effort and tossed this one on the tree. Unfortunately it pulled straight to full draw at only 32 lbs on the first pull. A little too aggressive with the profile on the bandsaw sadly. Was fun to shoot though. Maple 1x2 72" pyramid bow. 32@28".
-
Well done
-
perfect for working on form, imo. Congrats!
-
Cut it down and reprofile if you want more weight, around 5# an inch from each limb
-
Congrats nice looking bow I love maple my 3rd favorite wood !
-
Cut it down and reprofile if you want more weight, around 5# an inch from each limb
I just may do that Bub!
-
Well done. Impressive that it was tillered well right off the bat.
-
Well done. Impressive that it was tillered well right off the bat.
Pure luck!
-
Whiskeyjet, have you checked this out https://www.primitivearcher.com/smf/index.php/topic,35312.msg464947.html#msg464947
-
Congrats! That is a nice one and you're very talented if that's your second!
-
Nice bow. I agree as bubby, pikie it you will gain some draw wight.
-
Whiskeyjet, have you checked this out https://www.primitivearcher.com/smf/index.php/topic,35312.msg464947.html#msg464947
As a matter of fact, yeah that was one of my key references when I decided to make a pyramid bow. Thanks for posting it.
Congrats! That is a nice one and you're very talented if that's your second!
Thanks for the kind words. I've got a lot to learn still for sure. Especially need to slow down.
-
Nice! That pyramid build you linked was super helpful on my last board bow build.
-
Nice looking.
-
Cut it down and reprofile if you want more weight, around 5# an inch from each limb
Took 2 inches off each end now it's 68" and pulls 42@28. Thanks Bubby!
-
😆
-
Good thread showing the meaning of making your bow long enough and wide enough and you'll get what you want.Nice bow.