Primitive Archer
Main Discussion Area => Bows => Topic started by: apg on January 10, 2018, 02:34:42 pm
-
Hi everyone,
Just received an Osage Stave from Pine Hollow Longbows. It's got a couple of funny weird lumpy bits on one end, and a long bend down the other side, so it's going to be a funny looking bow, I think. I'll post updates here, but does anyone have first impressions on whether or not this should make a good functioning bow?
Ash
-
That should make a fine bow. Osage staves can have humps and bumps like that. Follow the growth rings and grain lines and you will be fine.
-
I should be so lucky.......
-
Be careful when removing the bark and sapwood(be sure to seal) not to violate and knots or pins and that will make a very nice bow.
-
Some might even say two bows.
-
No osage expert here, but this looks like a fine stave to me. Good luck with it!
-
Hey Ash, A nice bit of mild character. Sought after by most bowyers and will make a pretty bow, that functions as well as the bowyers current skill level. Capable of excellent performance.
If you feel a little intimidated and are a beginner(?)you might need to get a little confidence with a dead flat stave, and save this one for later. Nevertheless it should produce a nice bow even for a beginner. Personally I would build my experience first as you don't know when you will come across another similarly interesting stave. They are out there but you don't want to be kicking yourself later, when you are more confident with tillering, wishing you had waited and could have done a better job.
-
Take your time and it will make an awesome bow !!! Let the wood determine what it is....... Good luck and have fun !!!!
-
Some might even say two bows.
+1 Pat. Especially if you paid for it, get a 2fer!! I'd belly split that baby and make a couple simple bendy bows as a noob.
Do you have a draw knife??
-
I have tools to work it, but I’ll work with someone up in Vermont- my filleting is soooo off so I admit I need help.
I’ll be posting updates as I go and thank you all for solid reenforcement and advice.
Ash
-
That's a beautiful stave! I definitely think you could get two bows from that stave as well, by splitting the belly off. If you want to try that, definitely be careful when splitting the belly off, and maybe even use a bandsaw or table say to do it. You will be chasing a growth ring later anyway, so it won't matter if it follows the grain. I'm psyched for you! You're going to make a gorgeous bow with that!
-
Hi guys!
I spent a few days in Vermont with the Roots School - which was amazing, because the stave was twisty and turny, so I'm glad I had guidance. I've worked it into a 50 lb @ 28" bow, and I'm working on sealing it with Tung Oil now and will back it later. I wanted to post some photos to say thanks for your help and this is where I'm at.
Of course, I'll post some photos of the finished thing!
Ash
-
Four more photos!
-
Looks like a interesting stave. Congratulations on your bow. It certainly is a thrill to shoot your first bow. We like to see profiles of unbraced, braced and full draw. I'm glad you enjoyed the Roots school. I've seen some of their videos before.
Bjrogg
-
That was one heck of a character stave Pine Hollow sent you...Nice work
Don
-
Really liking your last 2 pictures. A mystical looking backdrop for sure.
-
Good work on typical type but tough wood osage will give you.Love the character in your bow.
-
Love the finished product, you did a great job with it! Do you have a full draw picture for us to look at?
-
Nice Bow! Really like the character in it.
Mike
-
I promise to post a full draw when I’ve finished it completely !
-
Nice work on this somewhat difficult stave. :OK Looking forward to the FD pic.
-
Looks like a great bow from a lovely stave. You must be thrilled with it! 🏹🙂