Primitive Archer

Main Discussion Area => Bows => Topic started by: paulc on May 09, 2018, 10:30:13 am

Title: prevent checking?
Post by: paulc on May 09, 2018, 10:30:13 am

So this is some oak from here in south GA that was cut the other week.  I decided to try and save a couple pieces for knife handles and maybe bow handles or something.  Anyway, I have rough cut it with the table saw and sprayed a generous coat of spray lacquer all over it-4 sides and both ends.  It is currently in a not climate controlled shop...what else should I do to try and control the moisture out so it doesn't check too bad?

Thanks, Paul

Title: Re: prevent checking?
Post by: Pat B on May 09, 2018, 04:51:14 pm

I consider red oak to be a whitewood so the back is the wood under the bark.
 Seal the ends and the back.