Primitive Archer
Main Discussion Area => Bows => Topic started by: DC on January 27, 2019, 12:24:44 pm
-
How long or how many bows do you get from a farriers rasp before you notice it's getting dull(ish)? I've had mine for about 5 years and 60-70 bows and I just noticed that it cuts way better on the toe and heel than in the middle.
-
Maybe a year
-
Are you careful with files Brad, or do you just throw them all in a box like my father did? ;D ;D ;D
-
I never got mu life out of my ferrier files but I admit I was rough on them and just threw them in the box. I never use them anymore. All I use is a nicholson 49 and a scraper.
-
I still have and use my original farriers rasp, it was given to me as a worn out rasp by a farrier. I have another one Clint gave me that is twice as heavy as the first one. I use this the most but the other one still cuts. But, I don't make nearly as many bows as I used to.
-
My rasps never touch anything except wood. I store them in bike inner tubes in my tool box so they never contact each other. When I use them I only set them down on a wooden work bench. I've been using the same rasps many years.
Pat, I'd bet a new bow that you will never wear out that farriers rasp you got from me.
-
It wouldn't be a fair bet for me, Clint. ;D
-
Have you tried sharpening it with acid?
-
You need to sandblast in addition to an acid treatment if you really want to meaningfully sharpen a rasp. The price of sharpening a farriers rasp approaches a new one.
-
I got into the habit of taking sanding belts cut to shape . . . 80 to 150 grit . . .
and gluing (using Barge cement) them onto wood blocks.
The shapes are endless - I’ve got a large box filled to the brim & it fills every possible shape to woodworking.
. . . I’ve used them for 25 years . . .
I used to have an assortment of beautiful rasps . . . BUT ! ! !
regards
Scyth
-
Like Clint, my rasps never touch anything but wood. That's one of the first lessons I give new bowyers who come over. First time they stack them on top of one another, my best tools get put away until they go home.
I rarely use a farriers rasp, but when I do, it better cut like a new one. I was given a couple dozen used rasps by a farrier one time. I couldn't give those things away fast enough.
-
I use mine a lot. I'm like Clint only touches wood and always have a file card to clean it. Never put it away with wood stuck in it.
Bjrogg
-
I use mine quite a lot, especially on walking sticks, not much on bow but don't really take very good care of them. They work fine for me and have for years. Mostly us a 49/50 and scrapper, They probably don't cut as good as some but do all I need. :) I like the used ones I get from a farrier friend of mine, I have had new ones but they are to sharp for me, like the old ones better, guess it just depends on what you get use to. :)
Pappy
-
I made at least 125 bows with a #49 and 50, they seemed to cut well until I picked up a new #49 on ebay for $20 and realized just how dull my rasps were.
I sent my rasps to Boggs tool to be resharpened, they came back like new. For first time customers the first one was free so I had $4 and shipping invested in getting essentially new rasps.
I understand Boggs sells the new #49 and 50s made in Brazil. They found they aren't as sharp as the old American made ones so they sharpen them before they sell them to be equal to the American ones.
-
I beat on my tools and pay no attention to them. I replace them every 2 years usually.
-
DC,, I dont think I care for them very well,, (SH)
-
As soon as I bought my farriers rasp I made a wooden box for it with the best intentions but I still seem to find it laying on the pile of sandpaper once in a while. Elves, I guess :D
-
definitely elves in my case,, and they really like to steal the chain saw files,, I dont know that they do with all of them,,that have gone missing,, (lol)
-
What should I look for in a new rasp? I'm starting over on tools and need a new rasp (or used, just need one period.)
-
using a steel tool after an abrasive can be detrimental, as abrasives break down and leave grit in the work
DC,
wore out in the middle? some like longer slower strokes... >:D
-
(-P
-
What should I look for in a new rasp? I'm starting over on tools and need a new rasp (or used, just need one period.)
I really like the Shinto saw rasp.
-
I've never considered how long a rasp is meant to last. I have a Folgers can full of assorted styles and sizes that have come my way over the years. My favorite is a semi-round roughing rasp that has produces maybe 15-20 bows. Due to screwing up a bicep several years I seldom use a drawknife any more. Mostly a hatchet and a nasty toothed farrier's rasp. Farm auctions, estate sales etc. are good places to pick up draw knives and rasps cheaply, especially if you happen to live near an Amish Community.
-
on the topic of rasps, if you ever get a chance to try out the "hoof plane" made by pferd I would highly recommend it. It is a milled tooth rasp rather than a stitched, comes in the same size 14" and is an absolute wood mover. It has a been a total game changer for me and my bows. I hardly touch my farriers rasps any more.
-
I use an American made, Save Edge 17" beast. I also made a
quick sheath (out of cardboard) when I first got it, and I always keep it from touching other steel tools at all.
Although I have used it on at least a dozen bows and I have noticed it isn't quite as sharp as it once was.
-
For my bow making rasps and files and a few others I have on a dedicated rack within easy reach of my working area. I am not too fussy about my metal working files and throw them in a drawer.
-
on the topic of rasps, if you ever get a chance to try out the "hoof plane" made by pferd I would highly recommend it. It is a milled tooth rasp rather than a stitched, comes in the same size 14" and is an absolute wood mover. It has a been a total game changer for me and my bows. I hardly touch my farriers rasps any more.
Where did you get yours Jamie? Looks interesting.