Primitive Archer

Main Discussion Area => Flintknapping => Topic started by: 1442 on August 19, 2019, 02:08:59 am

Title: georgetown flake
Post by: 1442 on August 19, 2019, 02:08:59 am
I worked this George town flake tonight
Title: Re: georgetown flake
Post by: 1442 on August 19, 2019, 02:15:01 am
I started on the ends removing some of the curvature but I got a big ol overshot on the base end that caused me to come up short on the finished width with 1-1/8". It wound up 3-7/8" long though so I got some extra there.
Title: Re: georgetown flake
Post by: 1442 on August 19, 2019, 02:17:15 am
worked the cortex side trying to remove more of the curve.
Title: Re: georgetown flake
Post by: 1442 on August 19, 2019, 02:18:48 am
Got the ishi stick and pressure flaked it the rest of the way
Title: Re: georgetown flake
Post by: 1442 on August 19, 2019, 02:21:49 am
before I did all that I made this point out of a piece of gravel. I broke the tip off so it wound up short
Title: Re: georgetown flake
Post by: 1442 on August 19, 2019, 02:22:59 am
And, heres one more I made before that from a flake
Title: Re: georgetown flake
Post by: bjrogg on August 19, 2019, 06:37:58 am
Thanks 1442. I was missing those.
Bjrogg
Title: Re: georgetown flake
Post by: gutpile on August 19, 2019, 08:48:41 am
nice , nice job....
Title: Re: georgetown flake
Post by: Tower on August 20, 2019, 08:24:44 pm
Love the GTown point.
What are the final dimensions?
Title: Re: georgetown flake
Post by: Zuma on August 20, 2019, 11:43:48 pm
Excellent
Title: Re: georgetown flake
Post by: 1442 on August 21, 2019, 07:24:26 am
thanks y'all
final dimensions are 1-1/8" X 3-7/8". I lost some width with the early overshot flake.