Primitive Archer
Main Discussion Area => Bows => Topic started by: mmattockx on February 27, 2020, 10:07:01 am
-
I'm located in central Alberta fairly close to the Rocky Mountain foothills. Since it takes a fair while to age a stave to a useful point I might as well get started on collecting a few now for future use. I have a chainsaw and a truck and I currently do some harvesting of wood for general woodworking and wood turning projects, so collecting a stave or two shouldn't pose a problem.
The question is what woods should I be looking for that will make a decent bow? The hardwoods in this area are pretty limited, with the most common being aspen/black poplar and it is very soft as hardwoods go.
Are there any local/semi-local members here that can point me in the right direction?
Thanks,
Mark
-
Is there any Yew up in the Kananaskis?
-
Saskatoon(service berry) makes a good bow. Not sure what else is up there. Birch and green ash?
-
Is there any Yew up in the Kananaskis?
Good question. I don't think so, but will look into that. I am about an hour from K-country so it is pretty accessible for me.
Saskatoon(service berry) makes a good bow. Not sure what else is up there. Birch and green ash?
Saskatoon, huh? Now that is all over the place. I will have to start paying more attention to the bushes on the side of the road. Some birch, not sure about the ash. I think I have seen some local saw mills advertising local ash, but I'm not sure of that.
There is quite a bit of mountain ash used as a decorative tree in residential areas, would it be useful if I could find a straight piece long enough? They are usually not that big and typically pretty twisted and forked up, though.
Something I forgot to mention is I seem to be gravitating more towards laminated bows. Does this change what I should be looking for much? My impression is it should broaden the range of useful woods but that is just from the reading I have done.
Mark
-
I’m in Vancouver, vastly different here in regards to bow woods.
As Chuck mentioned, Saskatoon berry is a good hardwood, if you can find a stave long and straight enough. Blackfoot would use choke cherry too
-
I know Robert Edwards likes paper birch...he's in Ponoka,the the guy that just did the alone the beast on discovery.if you ever make it to manitoba I could set you up with some white elm.....some of the very best bow there is...bush.
-
I know Robert Edwards likes paper birch...he's in Ponoka,the the guy that just did the alone the beast on discovery.if you ever make it to manitoba I could set you up with some white elm.....some of the very best bow there is...bush.
There is birch around here, but it isn't super common in my area. I will have to look around and see if I can find some that I can harvest. They certainly grow nice and straight for the most part. Supposedly white elm does grow here (according to the interwebs, anyway) but I can't say I have noticed any.
I have found that a local lumber yard has hickory boards. Would one of those be worth taking a shot at doing a board bow from if I find a good looking piece?
Mark
-
Look for this in a board.....one option ...
-
There are some sellers on Kijiji Calgary selling Elm yard tree lumber and slabs. They are American Elm which research indicates a good bowwood.