Primitive Archer
Main Discussion Area => Bows => Topic started by: Wasichu on May 01, 2008, 08:53:59 pm
-
I have had a "few" tips to blow out,and I would like your input on which glue you would use to glue osage to bamboo. I have this bow that I wish to use osage as overlays on the tips.
Peace
-
I never use anything but Titebond, and have never had a problem. Ya gotta have a good fit to begin with is all.
-
I've used both epoxy and superglue for gluing tips with good effect.
-
Are you de-oiling the Osage??? Wipe it down good with Acetone ( I prefer this) or Lye....Oven Cleaner will work too.....and let it dry....and then Glue them down with Titebond....I like Hide Glue myself the Best....you can glue two pieces of Glass togethe with Hide Glue....and it will break the Glass first before the Glue lets go....and than I seal it with polyurethane
-
APPRECIATE This ;D
Peace