Primitive Archer
Main Discussion Area => Bows => Topic started by: elisonj on April 12, 2021, 12:05:33 pm
-
Hi guys!
I did (just for Fun) a Kid's bow, made with a BroomStick. Yeahh... How unconventional? :knothead: :biglaugh:
But I have a lot of Fun making it, and turns up a nice video. :)
Hope you like.
Cheers
Elison
https://youtu.be/2PKPuDj6-Wk
-
Snappy little bow. Be sure the kids are well supervised. A bow like that could put your eye out. ;)
-
Snappy little bow. Be sure the kids are well supervised. A bow like that could put your eye out. ;)
Yes, for sure!
But... I think you lost the end. :-X :o
-
Nice! But you don't need that unorthodox material...
Here is real, functional broomstick bow. 43#@27", 145 fps with 10 grain/lbs -arrow. Length 168 centimeters, maximum width 24 millimeters, mass 370 gramms. Round back and half round belly. Unknown wood. I even left the bar code label on the back of the bow.
-
Nice! But you don't need that unorthodox material...
Here is real, functional broomstick bow. 43#@27", 145 fps with 10 grain/lbs -arrow. Length 168 centimeters, maximum width 24 millimeters, mass 370 gramms. Round back and half round belly. Unknown wood. I even left the bar code label on the back of the bow.
That's a nice one! (A) :BB
-
What a beauty Tuomo! So simple and elegant. I'm guessing you were limited in draw weight by your diameter? How much set did it take?
-
Tuomo, nice project, but cutting a string nock on the back is asking for a split tip. Anathema, taboo, chancy, etc.
-
Ah ha! Your once clean workshops will now be dirty, as you have no way to clean them. ;D
-
Thanks! Set was "normal", about one inch. Yes, weight was limited by diameter of the stick - I think I got everything out of it. And I have made a lot of "back nocks", no problems. The half hole on the other side is because there was a hole in the broom stick. I did not want to cut it shorter, so I leave the hole there, or what was left after tillering.