Primitive Archer
Main Discussion Area => At the Forge => Topic started by: Fox on April 25, 2021, 03:03:45 pm
-
This is the first knife I've made all the way! file metal, osage, and deer antler overlays(?) with scrimshaw in the antler (that was lots of fun) I made this one for my moms birthday :)
on a side note... I had a question about bevels... I had to regrind this edge like 3 times and it still isn't what I want really... I couldnt get a perfect flat taper, it kept getting round which really makes it less sharp... I am not sure if I explained that well or not but hopefully you can decipher what I meant :)
(https://live.staticflickr.com/65535/51139032330_8fe68ae063_k.jpg) (https://flic.kr/p/2kUYUDY)Untitled (https://flic.kr/p/2kUYUDY) by Livvydog (https://www.flickr.com/photos/141458655@N02/), on Flickr
-
What are you grinding with (2x72 grinder, belt sander, grinding wheel, etc) My first couple knives I used a lot of hand sanding to get things right. Definitely not bad for your first one.
-
I’ve got a hand grind wheel but I can’t get anything right with that... mostly I just use a file ...
-
Fox, you might try getting or making a bevel guide. I haven't used a 2x72, so can't advise there.
Hawkdancer
-
I’ve got a hand power grind wheel but I can’t get anything right with that... mostly I just use a file ...
Try something like this https://bladesmithing.timetestedtools.net/knife-31-santoku-with-hand-sanding-details/
Or make a jig like this, but with the bevel angle instead of the sharpening angle
https://bladesmithing.timetestedtools.net/diy-knife-sharpening-jig/
-
Don,
Very nifty jigs! Like a Wood Lansy setup on steroids (lol)! May have to make one! Thanks for the links.
Hawkdancer
-
Thats a great idea! i think ill have to try this out. thanks!