Primitive Archer

Main Discussion Area => Bows => Topic started by: bentstick54 on October 24, 2025, 12:43:01 pm

Title: Hole in the bow
Post by: bentstick54 on October 24, 2025, 12:43:01 pm

Here’s another one I just finished up. Osage 47#@28”, 66” ntn. Has 1/2” knot hole in the upper limb. I had a couple of road kill prairie rattlers, one with some holes in it so I was able to salvage it and line the biggest hole up with the hole in the bow. Was from another wonky stave that I straightened.

Title: Re: Hole in the bow
Post by: bentstick54 on October 24, 2025, 12:44:22 pm

A few more.

Title: Re: Hole in the bow
Post by: wooddamon1 on October 24, 2025, 05:30:33 pm

Very nice work, Brian!

Title: Re: Hole in the bow
Post by: Hamish on October 24, 2025, 05:49:35 pm

Yep. That's one sharp looking bow. Very nice tiller, and attention to detail.

Title: Re: Hole in the bow
Post by: sleek on October 24, 2025, 05:57:16 pm

Wow, that skin dressed up that bow quite nicely. And a good tiller to boot. Great job on that! Do you have any interest in putting this in the Bow Of the Month contest?

Title: Re: Hole in the bow
Post by: Pappy on October 24, 2025, 07:26:55 pm

Another Beautiful bow, love them with holes. Very nice work in all aspects. :)
 Pappy

Title: Re: Hole in the bow
Post by: bentstick54 on October 24, 2025, 07:46:05 pm

Thanks guys, it’s the 1st one for me with a hole so I feel good about it.
I’ll go ahead and enter it to maybe help generate some more interest.