Primitive Archer
Main Discussion Area => Arrows => Topic started by: markinengland on April 23, 2007, 09:55:23 am
-
I have a second hand Bitzenburger fletching jig but no instructions. Has anyone got any instructions they could scan and send me at markdesignhill@aol.com?
Many thanks.
Mark
-
Mark, Someone gave me a blitz not long ago. Let me see if they also gave me instructions. If so I'll scan and e-mail them to you. Pat
-
Thanks Pat. I'm convinced my jig is out of kilter as helical fletching seem about 60 degrees out on what looks like the cock feather should be.
Mark
-
Mark,The jig I have is set up to fletch 4 or 3 fletch.You can loosen the ellen screw and make the adjustment and then mark it with a Sharpie.It sounds like it might be set for 4 fletch.
-
Mark, I found my Blitz but no book. If I come across it I will contact you. I use a Jo-Jan when I fletch but I never turn down a gift. ;D Pat
-
I have instructions I will try to scan em at work today and e-mail ya ok
DanaM
-
Put a arrow shaft in the jig and loosen the two allen screws in the knobs under the the two magnets. Then let the clamp fall flush with the arrow shaft.You may have to help it by turning the knobs that the allen screws are in. This is all there is to adjusting the jig....... You should look at the three allen screws just in front of the knob that rotates you shaft and make sure it is set for the fletching configuration you desire. It has settings for 120, 90 and 75X105 degrees. Raise all the screws flush with the top of the hole, then screw down "ONLY" the one that is on your choice. the degrees are writen below each screw..... "Caution"!..... Do not take the screws all the way out! There is a small coil spring with a very tiny ball bearing in each hole. They have a way of getting lost very easy! I lost one and haven't found a replacement yet.
-
Mark you have mail. Anyone else want them? PatB?
DanaM
-
Sure Dana. Like I said I use a JoJan. It is straight fletch and my blitz is helical. Who knows, I may want to do some helical fletching sometime. ;D Pat
-
You have mail Pat
-
Dana,
Many thanks.
Mark
-
Hey dana can you email me a copy also/
-
Sure I will write myself a note and do it at work tommow don't feel like scanning em agian
danaM
-
mullet I need an address ???
DanaM
-
Hi all
Any chance I could get a copy of those instructions please?
info@thelongbowshop.com
Many thanks :)
Jason
-
You have mail Jason
Dana
-
You have mail Jason
Dana
Dana you're a star thank you! The Bitzenburger is indeed the daddy of jigs :D
Cheers
J
-
Could I get a copy of those instructions please?
howardg59@verizon.net
Thanks, Howard
-
Jason,
Sent you an email.
Mark in England
-
Hi there Dana,
I could use a copy of the instructions as well, if possible. Thanks .
Sky
aknapp@gci.net
-
I would like a copy too... I just received two Jigs from a friend that gave up shooting!
Josh
-
Skyhawk I e-mailed them, josh I need an e-mail address
-
Hello,
First post and iam already asking for something? Dana I also need a copy of Instructions for my Bitzenburger. I searched the net even googled it and nothing? Thats how i found you? I just purchased my jig from Mountain Archery and never got anything as far as instruction, I did send them a e-mail asking why?I would like to thank you alot, if there's anything i can do for let me know......
My e-mail address
dworsley@insightbb.com
-
I will e-mail them tommow at work OK If I can remember If ya don't get em just drop me a PM and remind me ok.
-
Got it thanks you for the kindness!
-
Hi would it be possible to get the bitz instructions? I have a grayling and they are very similar but I can't find any in depth adjustment instructions for it anywhere. i would really appreciate it. My e-mail is duccorp@yahoo.com. Thanx Dana
-
I have the instructions at work so it will have to wait until monday if I forget drop me a e-mail
mstqsewer@charterinternet.com
-
Hi Dana Could you send me a copy of the instructions I would greatly appreicate it. drouillard1
-
Need yer e-mail address
-
drouillard1@sbcglobal.net Thanks drouillard1
-
Drouilliard would you forward me a set too when Dana sends you one that way he won't thave to keep sending them to everyone. I would appreciate it. Email is outstandingautos@hotmail.com....Thanks Danny
-
Sent em-No problem
-
Dana, I sure could use a copy of the bitz. instructions. I have an old bitz. jig but no paperwork. . thx
My email - djwhitmer@cox.net