Primitive Archer

Main Discussion Area => Bows => Topic started by: billmac on May 04, 2007, 02:06:13 pm

Title: handle material
Post by: billmac on May 04, 2007, 02:06:13 pm
Does anyone use something other than leather for bow handles?  I don't have any right now and can't afford any.  Ideas?  Suggestions?

Thanks
Title: Re: handle material
Post by: welch2 on May 04, 2007, 02:24:36 pm
you can use cordage ,such as hemp or jute string. just wrap it tightly around the handle and tie it off like serving.

Ralph
Title: Re: handle material
Post by: Coo-wah-chobee on May 04, 2007, 03:33:28 pm
yup-as Ralph said or if u have it can use HMMM-coconut husk,bromeliad, milkweed,all kinds of vines, inner bark from trees,palm leaves. Nice thing is learn how to make cordage to do it ! ;D..bob
Title: Re: handle material
Post by: venisonburger on May 04, 2007, 07:16:49 pm
I just used string on a two short bows, I really like the way it feels.
VB
Title: Re: handle material
Post by: welch2 on May 04, 2007, 08:26:41 pm
you can also wool or other fabric ,you can use one piece just like leather or you can cut it into a narrow strip and wrap it like cordage.Or you can braid or use a weave with a strip of cloth.Be creative ,look at my thread My brother braided a piece of wire into a handle.

http://www.primitivearcher.com/smf/index.php/topic,2260.0.html

Ralph
Title: Re: handle material
Post by: DanaM on May 05, 2007, 07:21:46 am
billmac a good source of cheap leather and other stuff is St. Vincent de Paul stores, Goodwill stores,
rummage sales or any type of place that sells clothes for cheap. I bought leather coats for $5 at
St Vincents. Look for coats, boots purses etc. Also look for silk and linen for backings.

I just bought a roll of hemp cord at wally world for $5 it will make lots of handles. I wrap the handle
then use thinned down elmers(white) glue to soak it when it dries the cord is locked down, then I give
it a couple coats of spar varnish.

DanaM
Title: Re: handle material
Post by: Hillbilly on May 07, 2007, 11:47:27 am
Pat makes some really nice handle wraps from rattan cane.
Title: Re: handle material
Post by: Pat B on May 07, 2007, 01:48:25 pm
Rattan caning works very well. I have also used cotton cordage and hemp cordage and like the results from all. I usually set any cordage handles with Massey finish(2ton epoxy thinned with acetone). As long as you seal real well wood glues work fine too but is they are not well sealed they get tacky with sweat from your hands.   Pat
Title: Re: handle material
Post by: Dale on May 07, 2007, 06:22:08 pm
Get a piece of wool or another type of heavy cloth.  Cut a section about 1 to 1 1/2" wide by 24 to 30" long (approximate).  Start at the top of the handle section and spiral wrap the material down the handle.  When you have about 6 inches left in the handle wrap material tuck it into the material already wrapped down the handle.  The nice thing about using cloth for a handle wrap, besides the price, is that you can get different colors.  A red wool spiral wrapped handle looks pretty cool.
Title: Re: handle material
Post by: jkekoni on May 08, 2007, 07:02:29 pm
Handle wrapping is not needed, if you do not need it to keep glued handle together.
(If you however do, then it needs to be rawhide or linen or similar. Leather is just
for comfort and decoration.)

If you do not want to it be primitive you can use anything that is used for sport equipments.

Cork is one substanse that makes the handle softer, but you need to wrap something over it
to keep it durable.
Title: Re: handle material
Post by: Dale on May 08, 2007, 11:26:06 pm
Hey billmac, If you are still unable to get any handle wrap material I can send you some elkhide for a spiral type wrap. 
Title: Re: handle material
Post by: michbowguy on May 08, 2007, 11:26:49 pm
(http://i110.photobucket.com/albums/n103/feenicks72/bowpicsjamie021.jpg)
 
 $1.65 / 300 ft spool of natural jute.
 like a charm.

jamie