Primitive Archer

Main Discussion Area => Flintknapping => Topic started by: gstoneberg on November 28, 2011, 11:52:21 pm

Title: Almost got a knife blade...
Post by: gstoneberg on November 28, 2011, 11:52:21 pm

I had a little knife blade all done, and I snapped off the corner doing the notches.  If I could notch I'd be at least a little dangerous.  Good grief.  There's enough natural curve in this blade that I'm not sure I can get a point out of it now.  Might go ahead and notch it again in a quarter inch and let the antler go out onto the blade a little.  I really want a little skinner like this.

George

(http://farm8.staticflickr.com/7142/6422255535_45dc7262fd_z.jpg)

Title: Re: Almost got a knife blade...
Post by: seider on November 29, 2011, 12:16:43 am

that is a nice blade real nice edge to bad it broke i would try and knotch it again and see what happens.  But then again if i tryed i would have broke it way before i got to that point.