Primitive Archer
Main Discussion Area => Bows => Topic started by: Kegan on November 24, 2007, 09:20:53 pm
-
Well, I decided to treat her to a day at the spa. Actualy, a few days. I reflexed it, retillered it, refinished it, replaced the handle, messed with the weight (73# to 90# to 76#). Tried my had at nock overlays for the first time too, they turned out pretty well (to me at least). She's now 76# at 25", and shoots HARD.
[attachment deleted by admin]
-
That's a lot of bow. What's it made of?
-
great bow! yew: wqhat's the wood!
f.
-
She's a hell of a stick!!! 8) Kegan, I love your simplicity! 8) Pat
-
Thanks guys ;D. It's elm, my first one. I'm growing very fond of round belly D bows of late. I have another one in the works right now as well, and serval more being thought up ;).
-
Very nice, tilller looks good,thats a lot of bow,wished I could handle that kind of weight. :)
Pappy
-
Nice job Kegan! My shoulder hurts lookin at you pull that bow back!
-
That is a lot of bow, and from your picture it looks like you have a hinge developing at the handle. Maybe it's just the angle, though. I'd be awfully worried to draw that heavy of a bow when it was unbacked.
-
That is a lot of bow, and from your picture it looks like you have a hinge developing at the handle. Maybe it's just the angle, though. I'd be awfully worried to draw that heavy of a bow when it was unbacked.
Elm is strong in tension if you use the outside of the log, so I'm not that worried. It's plenty long enough for my draw length as well (25" at 64 1/2" long).
-
Very nice!!!
But at that weight I could only watch someone else try to draw it or hang it on the wall and look at it. ;)
My son thinks he could draw more weight than I have been making. I have some good elm in the shop so maybe I should make something like this to test him!! >:D
-
really envy some one who can draw above 70lbs, nice bow. RT
-
Great makeover. I like your bow because it walks the walk: Primitive! >:D
Bookmarked, of course, for Nov Self BOM.
-
damn. I wanna make a strong bow as well. And now that I said it, a bow of over 70 will be my next process.
-
And as folks start leaning towards heavier bows, I wonder what kind of accuracy you can get with something like this, Kegan? Being able to draw a 70+ pounder is one thing, being able to hit the broad side of a barn with it is another. Will you be hunting with this bow, or is it just to exercise the ol' tools with?
-Eric
-
accuracy is gained seperately with different bows. I shot just as well with a 68# after two weeks of shooting it. My other bow was 40#. I feel that the accuracy is acheaved when you no longer have to concentrate on pulling the bow.
-
Yeah, accuracy definitely improves once you don't have to focus on drawing and holding the bow. A 50 pound bow is much easier to get used to than an 80 lb bow though, and the muscle mass needed to pull a 50 lber will stick around a lot longer when it isn't being used than the additional muscle mass needed to draw the 80. And you're at much less of a risk of injury when drawing a 50 lb bow cold than an 80 lb, and muscles are almost always cold when you are hunting.
I'm not advocating against heavy bows per se, I just hate seeing people use bows they can't shoot accurately. When a bowhunter shows up and can't consistently hit a target, it makes bowhunting look bad. People don't always think to ask about the weight of the bow or how long the hunter's been shooting that weight. All they see is a bowhunter who can't hit the mark.
All the best,
-Eric
-
I can hit the broadside of a barn with it ;D. Actually, I am pretty accurate with her. I can hit a 3" spot or target at up to thirty yards on a good day. It depends heavily on the arrows I'm using, but a good heavy shaft should find it's mark if I'm on my game (but with my eyes, that's not as frequently as I'd like :'(). I don't like not being able to hit what I shoot at, so I shoot as often as possible. Local leaves are always in danger >:D.