Primitive Archer

Main Discussion Area => Arrows => Topic started by: crooketarrow on September 30, 2013, 08:56:28 am

Title: THANKS
Post by: crooketarrow on September 30, 2013, 08:56:28 am
   I must have had 8 or 10 people in the last couple years say theyed trade me for some sour wood shoots.

  I've never used or maded sourwood arrows.

  IT NEVER HAPPENED

I'd like to thank MADCOW for tradeing me a couple dozzen sourwood shoots.

 I don't have the time now to build anymore arrows. OUR BUCK SEASON CAME IN ON THE 28 TH.

 For the last 35 or so years I devoted all my time to bow hunting. And I mean ALLLLL

  But come winter after our season over.  I'll post some pic's. for the arrows I make.
 
                                                                                               THANKS MADCOW
                                                                                                                        ROY
Title: Re: THANKS
Post by: artcher1 on September 30, 2013, 12:09:37 pm
Shouldn't take you but a couple hours to make up a hunting arrow Roy. Get started now and you can be hunting with one this evening ;). You can use one over and over you know ;).................Art
Title: Re: THANKS
Post by: crooketarrow on October 06, 2013, 11:06:23 am
  NAW I have plenty of DOG WOOD arrows. I use'lly don't make to many arrows untill after our buck season (WINTER).
  I COULD'NT MAKE A ARROW IN A DAY IF I TRYED.
Title: Re: THANKS
Post by: artcher1 on October 06, 2013, 01:38:01 pm
I hear you Roy. Takes time to make a good arrow. I remember one of the first primitive arrows I made and it took 'bout all day. It was a split hickory shaft with a trade point. Took it out hunting the next day, without a finish, and a patch of ground pine eat it up on the first shot. So I try not to spend any more time on 'em than I have to.............Art
Title: Re: THANKS
Post by: crooketarrow on October 07, 2013, 09:07:22 am
  I make my arrows in stages.

I don't think I could build arrow in a day.

AFTER A COUPLE HOURS I CAN GET PERTY FRUSTRATED ON THE BENDING, BREAKING PART.

 You want to really save time. I straighten (no heat yet) and bundle green right after cutting. I start out with a shaft bigger than I need and rasp most of the beens out thats left.

  This helps that you'll only have half the time in a arrow shaft as your doing now.