Primitive Archer

Main Discussion Area => Bows => Topic started by: arachnid on April 28, 2016, 06:33:03 am

Title: Steam bending- before/during/after tillering?
Post by: arachnid on April 28, 2016, 06:33:03 am

So I have a few pieces if white oak left and I want to make a 3pc takedown bow with oak self-limbs.
Question is (like the title...)- when is the best time to steam in the reflex?

Thanks
Dor

Title: Re: Steam bending- before/during/after tillering?
Post by: tattoo dave on April 28, 2016, 04:07:21 pm

Hey Dor, I've steamed at all points mentioned. Seems to me steaming before tillering is best, but whatever works for you. I've never had much luck with steaming oak though. There's probably a better option wood for a take down too. But then again I've never made a takedown. Good luck, keep us posted.

Tattoo Dave

Title: Re: Steam bending- before/during/after tillering?
Post by: PatM on April 28, 2016, 05:37:47 pm

Not sure how much reflex you'll hold with steam. Dry heat is the preferred method.

Title: Re: Steam bending- before/during/after tillering?
Post by: simson on April 29, 2016, 03:45:00 am

I do it before tillering at near dimensions

Title: Re: Steam bending- before/during/after tillering?
Post by: joachimM on April 29, 2016, 03:59:23 am

Quote from: simson on April 29, 2016, 03:45:00 am

I do it before tillering at near dimensions

Agreed. But with oak I prefer to steam the bend and later on toast the belly in a caul without further bending.

Title: Re: Steam bending- before/during/after tillering?
Post by: arachnid on April 30, 2016, 01:45:18 pm

Thanks guys.
And while we're at it- in modern 3pc takedowns, the limbs are attached at an angle, giving the bow some deflex. Is there a benefit to do it like that (smoother draw maybe?)  and is it that critical? What will happen if iI attach the limbs a a zero angle?