Primitive Archer
Main Discussion Area => Arrows => Topic started by: Philipp A on February 01, 2018, 08:43:54 pm
-
Hi All,
I thought I would share pics and specs of a Quiver I had custom made for me. The design was inspired from the book "Encyclopedia of Native American Bows, Arrows & Quivers" written by Steve Allely and Jim Hamm.
It is an adaptation of the Algonquin Quiver from page 60 of the book. It was made for me by Fourrure Jackalope in Mt Tremblant, Quebec.
Specifications:
1. Overall length: 21.5"
2. Beaver fur for Bottom 19"
3. Lynx fur folded on top outside and inside 2.5"
4. Top circumference: 9"
5. Bottom circumference: 8"
6. Sheep fur inside lining (black) on inside
7. Bottom / quiver floor, outside deerskin with suede leather sandwiched in between deer skin and thick sheep fur on the inside
8. Strap: 34" length; beaver fur with deerskin lining and 5 x lynx tail tassels attached with leather straps top and bottom to quiver.
9. Fits comfortably 9 arrows
The arrows don't rattle at all in the quiver and are firmly held in place by the fur lining on the inside.
I hope you enjoy the pics and feel free to comment.
All the best,
Phil
-
Nice quiver, Phil and it looks good on your wall. 8) :OK
-
Very nice
Bjrogg
-
That quiver is great! I also like how you have your bow and arrows displayed around your buck. Very nice.
-
Sweeet....Very nice looking quiet quiver.I always like the look of fur in almost any useful situation.Like the display and the self nocked arrows too.
-
I have a beaver hide from 2 years ago that I caught looks like it might be meeting a knife real soon. Nice looking quiver.
-
Thanks a lot for all the positive feedback, it is much appreciated!
Trapper Rob: if you need any more details about turning your beaver pelt into a quiver let me know. The key to success was really glueing the sheep fur on the inside of the beaver pelt to increase stiffness and to have the arrows not rattle. The inside bottom of the quiver is very thick sheep fur with suede in between and deer skin at the bottom. It also helped to make the quiver rigid and not collapse. I also like the contrast of the Lynx fur on top which further prevent the arrows from moving around in the quiver even if you don't fill it with arrows.
BowEd: I am posting a few pics of the arrows I have made. The shafts are Surewood shafts from Douglas Fir and the points are from Steve Allely. The turkey feathers are from my bush which were left over from a coyote kill. Two of the arrow pics are with field points and tail feathers from the same turkey.
All the best,
Phil
-
some more detail pics of the quiver showing strap attachment and bottom of quiver below
-
wow, very nice things you make!!
Hans
-
Thanks Hans! Just so that you don't get the wrong impression, I did not make the beaver quiver myself but had it made in accordance to my specifications and with my input. The arrows (except for the raw shaft and tips) and bows are my own creation.
It was really a collaborative effort between the furrier and myself. I brought in my arrows, showed him the pictures of the Algonquin Beaver Quiver from the book and then we were trying to come up with a design that holds its form just using fur and deer skin and would be close to authentic but with the variation of using a combination of beaver and lynx fur and the sheep lining on the inside.
The next beaver quiver I will make myself. I will first play with some cheap fur before I dare cut up a nice beaver hide :)
-
Looks like a very nice and functional quiver.
-
Now that's a pretty quiver.
-
Nice detailed work and pics of your set up.With time I'm sure you'll get a quiver for every occasion.That's what they all ended up for me to be.My favorite ones are just a plain old beef rawhide cat quiver tube.That way I really don't care if they get wet/full of stick tights/or dirty with mud.Adds to the petina....lol.You might want to get into tanning a hide yourself to save money.It adds to the satisfaction of it all.Boughten tanned hides can be expensive.
-
Hi Ed, thanks for the feedback. I agree my next quiver will be one I don't have to be concerned about if I get it caught on a branch or if it gets all dirty. A beef rawhide quiver sounds like a good idea for that. Alternatively I might just make one entirely made of sheep skin with black for the bottom part and fluffy white on top. I suspect that I will use my beaver quiver primarily for target shooting and the rest of the time it will spend decorating my wall :).
have a great weekend,
Phil
-
Nice work. Looks good.
-
Very cool, nice display
-
Forgot to mention...I like that last pick of a stone point.A clovis type look.Mainly because it looks to be very easily extracted from a regular type leather quiver.
-
Really nice quiver, bow and arrows too.
Is that the reflection of a canoe in the glass window above the bow?
-
@1442, thanks! Yes it is a cedar strip canoe. I will have to restore it a bit this summer, I would like to put it back into the water.
-
Phillip,
Please keep us posted on the canoe project, at least by pm! I have a cedar canoe that needs restoring as well. It has been tentatively id'd as a B N Morris.that someone covered with fiberglass and epoxy. I hope to be able to "skin" it with a heat gun, and seal it with varnish to preserve it, while restoring goes on?
Hawkdancer
-
Thank you for posting pictures of how you fastened the strap. Always struggle with that , stitch, rivet, tie. Great craftsmanship.
Just got another beaver & split the tail. Was thinking about making another willow hoop to stretch the hide. May reconsider now. John
-
No problem Stoner, I am looking forward to see the finished quiver if you will make one from your beaver hide. I think the key to making one is to glue sheep skin or other fur on the inside portion of the quiver and to reinforce the bottom (see materials in posting) to prevent arrow heads from perforating the bottom and to give the beaver stability and to make it quiet.
-
Love it! Awesome quiver and great display. I’m gonna play with making some heads like those, looks like a super efficient design. The tassels though, what’re they for? I put thumb hooks on my rifle slings but my quiver goes across my back and holds itself in position. Just curious
-
@Tracker0721,
Thanks for your comments, it is much appreciated. The tassels are really just for looks / decoration. This quiver also goes across my back and the beaver hide strap with the tassels goes across my chest. I used the lynx fur tails in lieu of the yarn tassels used in the Algonquin quiver I used as a model for my quiver (dimensions etc.) I thought the lynx tails looked prettier than the yarn tassels. The same is true for the folded lynx fur on top. It is very fluffy fur and prevents any rattle from the arrows in the quiver. They are in there rock solid whether you fill the quiver or not