Primitive Archer
Main Discussion Area => Bows => Topic started by: Msturm on March 10, 2018, 07:01:36 pm
-
I just finished finishing this. So now it's mostly finished.
It is vine maple with simple self nocks and the ridges on the back highlighted with some dark walnut stain that was rubbed down with 400 sandpaper to bring out some contrast. 66.5 tip to tip . It is a bit lumpy on the back (hence the name). Grip is jute twine and superglue. rest is a leather flopper. 56@28. Finished with stain, and 7 coats of danish oil and rubbed down with paste wax. Shoots great.
(https://i.imgur.com/c1myyPj.jpg)
(https://i.imgur.com/vAw2Pmc.jpg)
(https://i.imgur.com/eS98FgY.jpg?1)
(https://i.imgur.com/qARUiBY.jpg)
(https://i.imgur.com/Glf2nG5.jpg)
(https://i.imgur.com/VEI32bc.jpg)
Additionally, the temp was about 16 degrees. selfbows work fine in the cold.
Thanks.
Msturm
-
Very nice.
-
I was going to do a build along for this one, but was way more simple to film it all and edit it down into digestible chunks. Nothing is for sale and this video series is as much for my education as everyone else.
Check it out if you like.
https://www.youtube.com/watch?v=rjF7Fm_IQeE&list=PL1qKcxnxNrwSmBnbxfDlgX-m07kVM4Re7
-
beautiful bow and scenery. I will watch the video later tonight.
-
That turned out great! and that was a good build along in the videos you made. I bet it shoots well.
Kyle
-
That's one of the coolest full draw pics I've ever seen. Both the bend and the scenery. ;) Very nice! (-S
-
How did I miss this one.Nice work & pics!!Congratulations.
-
Nice bow. Looks great unbraced.
-
I like all the profiles...Nice build from that character VM...
Don
-
Beautiful job on that, profile both braced and unbraced looks great.
-
Sweet bow! Nice Job! Love the background on the FD pic!
-
Outstanding! Very nice. Jawge
-
Nice looking bow
-
Nice bow and I really like the last pic with the arrow in flight.
DBar
-
Tiller looks great! I really like the contrasts with your finish on the back of that bow.
That sure is some amazing scenery you have there :)
Mike
-
Really nice, love the "pure" look of it
-
Nice bow!
-
Hey there vinemaple! I was hoping you would chime in! Your name says it all...
-
Great looking bow.
-
Nice , and natural looking too, wish we had vinemaple around here.
-
Nice work, looks like a shooter to me. :)
Pappy
-
Michael:
Very nice bow ... thanks for posting and the videos.
I've had a vine maple stave that John Strunk and I harvested in OR back in 92 that needs to be made into a bow one of these days. I've been away from archery for too long and getting fired up to get back into it.
Regarding your removing the bark, how much did you actually have to manually remove vs. having it pop loose during initial bending? Just curious. The stave I have is pretty lumpy so bark removal for your stave is of interest to me. Thanks.
-
Sweet bow! I love vine maple.
-
Awesome pics! Awesome bow!- Hammertime
-
Regarding your removing the bark, how much did you actually have to manually remove vs. having it pop loose during initial bending? Just curious. The stave I have is pretty lumpy so bark removal for your stave is of interest to me. Thanks.
The long section you saw pop off in the video is the only part that popped off in a big section. Other smaller 2 to 3 inch sections popped off on the other limb but The rest was scraped and picked at with the leather awl on an old scout knife (works great for those little hard to reach areas.) If I had my way I would remove the bark immediately after cutting.
-
I have to say, really nice bow. Sometimes all the fancy overlays, reflex tips, backing and paint only serve to distract from one like this. I appreciate bows period but, this is my favorite. Did you start with any reflex to get that flat perfect profile.
Thanks,
Greg
-
The videos are real nice. Just watched! My only question now is where can I buy a stave like that. Really!
Thanks,
Greg
-
Greg, I sent you a PM.
-
I like Lumpy! Good lines, and some character. Great photos too. You did well.
Steve