Primitive Archer

Main Discussion Area => At the Forge => Topic started by: bubby on July 13, 2018, 08:29:02 pm

Title: Tinkering at the forge
Post by: bubby on July 13, 2018, 08:29:02 pm

I was tinkering today, I saw some horseshoe nail bracelets and wanted to give it a try but no nails, so I grabbed some 1/4" roundstock and started heating and hitting. Had to make a thin rectangle. Drew it out and where I needed the head I heated and hotcut the steel leaving it flared on one side. Close enough for me. After it was drawn out I just used my torch for all the bends

Title: Re: Tinkering at the forge
Post by: BowEd on July 13, 2018, 08:44:00 pm

I like it.

Title: Re: Tinkering at the forge
Post by: osage outlaw on July 13, 2018, 09:14:49 pm

Nice work!

Title: Re: Tinkering at the forge
Post by: Pat B on July 13, 2018, 09:20:28 pm

Nice.   8)

Title: Re: Tinkering at the forge
Post by: chamookman on July 14, 2018, 01:59:17 am

Way cool Bub  (f) - Bob.

Title: Re: Tinkering at the forge
Post by: Danzn Bar on July 14, 2018, 02:33:32 am

Nice job Bub
DBar

Title: Re: Tinkering at the forge
Post by: Trapper Rob on July 14, 2018, 09:02:07 pm

Looks nice.

Title: Re: Tinkering at the forge
Post by: Stixnstones on July 16, 2018, 03:24:31 pm

Too cool

Title: Re: Tinkering at the forge
Post by: JW_Halverson on July 16, 2018, 03:47:20 pm

Nailed it!

Title: Re: Tinkering at the forge
Post by: Pappy on July 24, 2018, 05:01:09 am

Very nice work. :)
 Pappy