Primitive Archer

Information and Resources => Trading Post => Topic started by: Pat B on August 13, 2018, 07:15:40 pm

Title: ISO trade points
Post by: Pat B on August 13, 2018, 07:15:40 pm

I need 6 or so trade points.   I have lots of feathers, some B-50 string material and other stuff.

Title: Re: ISO trade points
Post by: KHalverson on August 13, 2018, 07:18:08 pm

whats your preferred weight pat?

Title: Re: ISO trade points
Post by: Pat B on August 13, 2018, 08:41:19 pm

Kevin, 125gr to 150gr.

Title: Re: ISO trade points
Post by: KHalverson on August 14, 2018, 03:23:21 am

I'd be happy to make you a half dozen.

Title: Re: ISO trade points
Post by: Pat B on August 14, 2018, 06:52:24 am

What do you want in trade? I have other stuff I didn't mention above.

Title: Re: ISO trade points
Post by: Sidmand on August 15, 2018, 07:25:57 am

I have several unfinished trade point (as in not sharpened yet) that I cut from a circular saw blade.  If you still need some I can send you a half dozen or so.

Title: Re: ISO trade points
Post by: Pat B on August 15, 2018, 08:02:52 am

What would you like in return, Sidmand? Will you post a pic of them?

Title: Re: ISO trade points
Post by: Sidmand on August 15, 2018, 09:29:53 am

I can post a picture this evening.  I will look around and see what I am in need of, if anything. 

Title: Re: ISO trade points
Post by: Sidmand on August 16, 2018, 07:18:15 am

Sorry Pat, I didn't get a chance to get pictures last night.  My oldest daughter is going to be going down to our military processing center today to possibly/probably join the Navy.  I was up till midnight trying to calm her and her mother down.  I have a really old pic where you can see some of the points that I found in my pictures this morning.   I will try to get another pic this evening.  If I remember right, they are all in the 125 to 150 grain range, right around an inch wide, and a bit over 2 inches long.  But, let me verify that.

Pic attached.  You can see the points hiding behind the brown twine, right in the center of the picture.  I am making a gillie suit for hunting, I am pretty terrified of heights, so I am looking for some ground advantages.

Title: Re: ISO trade points
Post by: Pat B on August 16, 2018, 11:04:24 am

Hard to see them in this pic. PM sent with my email.
 Good luck with your gillie suit and ground hunting. I've gotten a bit uneasy with tree stands in the last few years after hunting from them for 40 years.

Title: Re: ISO trade points
Post by: DuBois on August 16, 2018, 12:27:36 pm

Kevin just sent me some and they were exactly what I wanted and more.

Title: Re: ISO trade points
Post by: Pat B on August 16, 2018, 01:52:24 pm

Yeah, Kevin and I are working on a deal mow.  :OK

Title: Re: ISO trade points
Post by: Little John on September 17, 2018, 12:50:54 pm

Pat, I just saw this post. I will try to make up some when I. Get home and some golden points also

Title: Re: ISO trade points
Post by: Pat B on September 17, 2018, 02:45:38 pm

Cool. Thanks Kenneth.  :OK
Safe travels home.

Title: Re: ISO trade points
Post by: Little John on September 17, 2018, 05:21:14 pm

Pat do you like single or both side bevel. If single bevel do you prefer them to be for left or right wing fletch?

Title: Re: ISO trade points
Post by: Pat B on September 17, 2018, 09:09:11 pm

I've never been that picky. I guess if you do single make them left but I can go either way.