Primitive Archer
Main Discussion Area => Around the Campfire => Topic started by: lebhuntfish on January 16, 2020, 02:31:33 am
-
Hey guys, I've been gone for quite a while. Sure have missed everyone!
I have recently had quite the run of leather projects going.
I should first say, I'm not really a holster maker, but I guess I do a pretty good job at it.
Here is a few holsters I have made in recent weeks.
-
For those of you who don't know, these are called pancake style holsters. Just two pieces of leather pancaked together, well kinda.
First one is a glock 17 gen 4 holster. My wife bought the gun for me for my birthday back in December, it's a full size pistol so I couldn't carry it in my pocket.
All of the holsters are made out of mahogany bison leather. They are hand cut, punched, glued, and hand stitched with a stitching awl. This particular one is has a black suede liner in it. The decorative stiffener on the front if the holsters are an extra piece of bison with a thin piece of gator print leather that I was gifted to from hunterbob. The first one is finished with several coats of a mixture of beeswax and deer talo that I made and use on all my leather and for a patch lubricant in my muzzle loaders.
-
Nice :OK ! Bob
-
The second one is a holster that I made for a good friend of mine. It's for a SCCY cpx-2. This one has no liner in it and I finished it totally different. Once I was done making the holster the leather didn't seem to be stiff enough for what I was looking for. So I used a very old technique to stiffen the leather.
After I wet formed the leather I waxed it. You get the leather pretty hot and brush on melted beeswax until it wouldn't absorb any more. I concentrated on the gun area and not as many cotes on the belt loop area. Then wiped it down good, put the gun in and worked it in the leather some while it was hot. Then stuck it in the freezer until it was cold. Then once it came back to room temperature I rubbed it down with a beeswax and deer talo mix that I made for my leather stuff. Then melted it with a hair dryer and buffed the heck out of it. This made the leather very hard and tough. If you ever try this don't just wax it. That makes the leather very hard but brittle, alway add the beeswax and talo mixture to it.
-
Thanks Bob, but here's a few more. This one is my favorite little giant wheel gun. Taurus 5 shot 357 mag. I finished it the same way as the last one.
-
And last but not least the toughest project yet. A matching double magazine holster for my glock. It has the suede liner and is finished with the beeswax and talo mixture.
-
Very nice Patrick. :OK
-
Beautiful work, Patrick. 8)
-
That is some fine leather work Patrick, just beautiful. :)
Pappy
-
Thanks guys! It's been a while since I done any leather work. They were fun projects.
Patrick
-
First off great to see you here again Patrick. Second man that's some top shelf stuff there. Really nice work.
Bjrogg
-
Hey Patrick, glad you're back. Darn nice looking holsters.
-
Really good work!
-
Those are very nice
-
Very nice! Good to see you're still kicking! Looks like I will need to get some pointers from you!
Hawkdancer
-
Great looking holsters.
Thanks Leroy
-
outstanding work,
-
I should first say, I'm not really a holster maker...
Could've fooled me! Great job!
-
Great to see you again Patrick. I have been missing your posts here. I hope you are back for good.
-
Great to see you again Patrick. I have been missing your posts here. I hope you are back for good.
Thanks buddy! I sure hope so too. I've had a lot going on for a long time now, but I've made some changes and I hope to be back on PA giving everyone a hard time again.
Most of whats been going on is some life changes. I found out I wasn't as invincible as I thought I was. The stupid thing I done as a young man is really kicking my arse now. A little health trouble, nothing to serious but the worst thing that bothers me right now is is this arthritis. It's not as much the pain but the inability to do certain things. But I'm working hard to make sure that it doesn't get the best of me. My new carrier has kept me really busy which is part of the reason I have been absent. But I'm going to start making time for this amazing craft and community again. I sure have missed everyone that's for sure.
Patrick
-
How hard would I have to twist your arm to make me one for my ruger 44 mag?
-
Very nice work Pat.Items made like that will last a lifetime and more.
-
That just OUTSTANDING work. You have some real talent for leather work.
-
Beautiful work there Patrick...
-
Thanks fellas! I really appreciate it!
Kevin, it wouldn't take a lot for you brother. Just need your gun and some time.
Patrick
-
Thanks fellas! I really appreciate it!
Kevin, it wouldn't take a lot for you brother. Just need your gun and some time.
Patrick
Well, I think I will see you in October :) I will bring along some trade fare aswell.
-
Sounds like a plan brother!
Patrick
-
Beautiful! Very professional looking and pretty.
-
Clean work Patrick
-
Thanks guys, as usual, I can point out all of the flaws. But as someone once said, if it's perfect it's not hand made.
I've been using them pretty much every day, and so far I'm very pleased with the results. The glock holster is my favorite but I can almost forget that the revolver is on my hip. There will be more in the future!
Patrick