Primitive Archer
Main Discussion Area => At the Forge => Topic started by: Bryce on February 17, 2020, 02:34:16 pm
-
Definitely didn’t watch or read anything too in depth about it. I took a slice and etched it and it looked like just a geometric conglomerate of metals (cobalt, iron, nickel, etc.). From the paper that came with it I feel the silica impurities are the main causes for the cracking and blistering. One slice forge welded while the others....did not. There are some visual impurities along with some cracking I can easily cut out and I’m gonna try and keep it as hot as possible and see how well I can hammer anything else out, maybe get a more homologous piece.
But I can’t imagine I’m the only one who’s had issues. Any pointers? And no I’m not going to heat down in a crucible. I feel it would ruin the uniqueness of the piece.
If anything I might just end up layering it into some 1065 I got Layin around.
-
I think the original Bowey Knife was made from a meteorite.
-
look up alec steele meteorite on youtube. he tried forging one but with the crystaline structure and lots of cracks and stuff i didnt work
-
I’ve been told to be light with it like very raw tamahagani.
Yes I know Alec last I heard he was too rash with the stuff. But idk for sure lol I didn’t know he made a video about it.
Thanks pat I’ll look that up. I know a pharaoh had a meteorite dagger buried with him, thought that was neat.
-
Try forging it in a canister and make damascus thats what they did on Forged in Fire.
-
Try forging it in a canister and make damascus thats what they did on Forged in Fire.
I have a boat welded up, the only thing is all the slight impurities I’m not sure how well it’ll turn out. Usually pretty confident with canister Damascus.
I’m gonna try and get a clean enough piece to forge weld for hopefully a 7” San mai knife.... but it all has to wait till Saturday :/
-
I have seen meteorite bladed knives and they are beautiful and expensive.
-
I have seen meteorite bladed knives and they are beautiful and expensive.
I’ll have to check those out.
I took a small test piece and folded in some 1065 and another piece I folded in some 4140. The latter seemed to stick a lot more readily when pressed, not hammered into forge weld
-
I suppose you can get good or bad meteorite?
-
I suppose you can get good or bad meteorite?
I guess it possible. I’ve only got the one.
-
I think your tamahagani route makes the most sense. I would break it into the smallest pieces that I could. Pancake those pieces, flux and stack them. Forge weld them and draw them out. With the kind of inclusions you mentioned I would be very careful if you choose to do a canister or canoe with it. I do think that is your best bet to get something unique. I make a style of Damascus called "fossil" where you essentially take all the small scrap pieces of Damascus that you have left over from various projects and jam them into a can. The pattern it creates is very appealing.
-
I think your tamahagani route makes the most sense. I would break it into the smallest pieces that I could. Pancake those pieces, flux and stack them. Forge weld them and draw them out. With the kind of inclusions you mentioned I would be very careful if you choose to do a canister or canoe with it. I do think that is your best bet to get something unique. I make a style of Damascus called "fossil" where you essentially take all the small scrap pieces of Damascus that you have left over from various projects and jam them into a can. The pattern it creates is very appealing.
I still haven’t gone back to it yet. But if I do I’ll probably layer and stack it
-
well....just pack It up and send her down to me. HA! I make my living at the forge and although I get to do what I want to most of the time, I rarely get to play.
-
That’s rad man wish I could. Wood is my number 1 medium.
Been working on some San mai stuff until I come back round to it.