Primitive Archer
Main Discussion Area => At the Forge => Topic started by: KHalverson on May 29, 2020, 11:01:55 am
-
seems that tomahawks have been 75% of my commissions since the start of this pandemic.
most are forged from 4140 except those made from rail road spikes as requested.
here are some random pics of the last 3 months work.
(http://i.imgur.com/JhyfxbM.jpg) (https://imgur.com/JhyfxbM)
(https://i.imgur.com/poylwZw.jpg)
(https://i.imgur.com/cO7tSbQ.jpg)
(https://i.imgur.com/EhiK7PE.jpg[/img.][img]https://i.imgur.com/daYxeaK.jpg)
(https://i.imgur.com/E4CaGqr.jpg)
-
I really like your style of hawks. Where do you get the steel for them?
-
Really great lookin' hawks.
-
I really like your style of hawks. Where do you get the steel for them?
about 50% comes from the scrap bin @ work.
the other 50% I purchase online.
p.m me if you'd like the suppliers name.
great prices and service.
-
Very nice work! I'd dance with those 'Hawks anytime!
Hawkdancer
-
Haven't been here in a while, man have I missed out. Awesome Craftsmanship! John
-
Now if that polled hawk had a curly ash handle....
-
Now if that polled hawk had a curly ash handle....
wish I had enough to make a handle.
-
If wishes were horses, beggars would ride!
-
If wishes were horses, beggars would ride!
boy isn't that the truth!
dug around and found a source.
-
Awesome work Kevin...
Don
-
I tried twice this morning to make a decorative "war hammer" from a R R spike. Any tricks on drifting the haft hole? I'm thinking about drilling a pilot hole through. I had both attempts herniate to the side. Dang it!
-
I tried twice this morning to make a decorative "war hammer" from a R R spike. Any tricks on drifting the haft hole? I'm thinking about drilling a pilot hole through. I had both attempts herniate to the side. Dang it!
I hot cut a slot then drift .