Primitive Archer
Main Discussion Area => Bows => Topic started by: Piddler on October 16, 2020, 06:34:55 pm
-
Fellas,
I have a couple photos I need you to look at. Hope they attach. It seems that I get different tiller that has to have something to do with the center of draw. I am attaching two photos one each with either limb on top.I have a crooked limb and straight limb and labeled as such. Drawing split finger with the nocking point 1 3/8" above bow center putting the bottom of the arrow approximately 1" above center. l know lots if discussions about equal length limbs vs Asymetrical so may have something to do with that. The bow is 61" NTN Osage 1 1/4" wide. It is about 50 lbs at 26". Kind of a semi bendy handle with the handle section 1" wide. I did some dry heat straightening on the crooked limb since the last tiller check on the tree and just took photos. Now I'm confused. Braced profile has the crooked limb about 1/8" stiffer about 10" down the limb from the handle. The rest is pretty even.
So my question is do I move the Knock and Grip up or down to compensate for the different way it stresses the limbs or something else. I added some circles to the photos.
AS always thanks in advance
-
That sure is a pretty tiller. I would not change a thing. Jawge
-
I think seeing it unbraced would help,,too
-
I too wish to know about tillering style
-
Thanks Jawge.
Brad, attached is the unbraced profile. This was taken just after un-stringing. It follows the string about 1/4" after a shooting secession. Also attached is a braced photo.
Piddler
-
I would keep it like it is in the second photo (straight limb top) if it shoots well that way. If you want to have the straight limb on bottom, the other limb needs to be weakened a bit, either with wood reduction or by moving the grip a bit higher. Is the arrow 1" above center in both photos?
-
Please post the regular FD pic straight up without the circle. Maybe shoot one more with plain background.
The braced and especially the unbraced looks great to me.
-
I would keep it like it is in the second photo (straight limb top) if it shoots well that way. If you want to have the straight limb on bottom, the other limb needs to be weakened a bit, either with wood reduction or by moving the grip a bit higher. Is the arrow 1" above center in both photos?
+1
Del
-
This may help...How does it launch an arrow would be my question...Looks good from here, always tiller in hand the last 3-4 inches...
-
Timbo, I have no preference which limb is on top. I think it shoots a bit better that way. The arrow is 1" above center in both photos. Think I should move it up or down a bit.
Medicinewheel, I'' post one without the circle with straight limb on top. My photographer is not around for a different photo sorry.
Looks like burchett.donald just turned one around. Looks the one with the crooked limb on top.
Thanks burchett.donald
Thanks Del
Piddler
-
If it feels better this way shoot it this way; don't flip it anymore!
If the bow feels right in the hand when you pull it I don't think you need to do anything about it.
If the situation gets worse you still can do something about it.
Nice bow!