Primitive Archer
Main Discussion Area => Bows => Topic started by: Fox on October 18, 2020, 07:43:17 pm
-
I was going to make this a unbacked slightly bend in the handle 58" - 60" long, 1.5" wide at fades, straight taper to 1/2" tips, 50 at 27".... not sure if that is proper design or not. but the problem is I accidentally cut to close to this knot. its right in the fade. advice?
(https://live.staticflickr.com/65535/50503939857_4b27073b08_k.jpg) (https://flic.kr/p/2jWRTMK)Untitled (https://flic.kr/p/2jWRTMK) by Livvydog (https://www.flickr.com/photos/141458655@N02/), on Flickr
-Fox
-
need to see picture of whole bow,,
-
Here ya go... ;)
(https://live.staticflickr.com/65535/50504559302_dc50021925_k.jpg) (https://flic.kr/p/2jWV4VQ)Untitled (https://flic.kr/p/2jWV4VQ) by Livvydog (https://www.flickr.com/photos/141458655@N02/), on Flickr
(https://live.staticflickr.com/65535/50503684898_da41d26080_k.jpg) (https://flic.kr/p/2jWQzZU)Untitled (https://flic.kr/p/2jWQzZU) by Livvydog (https://www.flickr.com/photos/141458655@N02/), on Flickr
(https://live.staticflickr.com/65535/50503684568_6dd8c6c554_k.jpg) (https://flic.kr/p/2jWQzUd) (https://flic.kr/p/2jWQzUd) by Livvydog (https://www.flickr.com/photos/141458655@N02/), on Flickr
-
Finish your rough out and get everything neat, tapers roughed in and then you will be able to tell.
-
It’s pretty close to ruffed out...
-
If all of the wood left around the knot in that first photo is solid/unviolated, I think you left enough. If you dinged it up somehow, a closer-up photo would help.
-
Close up coming up... no violation on the back of the bow.. I just didn’t think I left enough around the knot... I dunno though
-
(https://live.staticflickr.com/65535/50506443621_2d2366f7fc_k.jpg) (https://flic.kr/p/2jX5J56)Untitled (https://flic.kr/p/2jX5J56) by Livvydog (https://www.flickr.com/photos/141458655@N02/), on Flickr
-
I think it's OK. It's not gold, just finish the bow and see if it works.
-
okay jim.... would wraping that spot with linen or sinew or something like that help? this is my first and only real osage stave so id really like to get a bow out of it... it doesn't have to be the bow I first described just any shooter.
-
it should be ok,, just dont make it bend in that spot when you tiller
-
okay so should I go for a stiff handle? or can I make everywhere but there bend? sorry so many questions, I just really want a sweet one from this stave!
-
just go for stiffer in the handle,,
-
That doesn't look bad at all - just carefully clean it up, and as others said, keep it from bending too much. Don't use a draw knife anymore at this point around the knot, as it's very easy to snag and tear grain.