Primitive Archer
Main Discussion Area => English Warbow => Topic started by: globalmark on April 03, 2021, 05:38:33 pm
-
Hi Guys
just been given a 30 year old set staves from Rex Oakes (famous UK bowyer makes howard Hill bows and a good friend) as he doesnt make all wood bows and Knows i made a few - i spliced the handle together and its a beautiful piece of wood - can get a 72- 72 1/2 bow out of this and i would like to make it easy useable for me so maybe 55-60lbs bow , it was already pre- cut so have a 32mm wide across handle at moment and similar depth ..
would love some suggestions on the dimensions just as a starting point - as never worked with Laburnum before and its pretty rare to get this ..
made a few Yew longbows and a Ash long bow , few flatbows and others from UK hawthorn , blackthorn and hazel - but a first in Laburnum ...
Also anything else that might be useful on using Laburnum if anyone knows any tips
Thanks Mark
-
Treat it exactly like yew. Rough out dimensions should be the same.
It will make a superb bow and is everybit as good as yew.
-
Hey Bownarra
Thanks for that - that was my plan but wasnt 100% sure as Laburnum is a first for me , did some clean up on glue splice today and rough sized - used a hand plane and nice to work with so far .. will take plenty pics and upload making it some stage - thanks