Primitive Archer
Main Discussion Area => At the Forge => Topic started by: Don W on December 31, 2021, 04:26:39 pm
-
I haven't made a knife in a while but it started with a request for a Muk without scales. The future recipient wanted to add his own scales. So I made this:
(https://www.diy.timetestedtools.net/wp-content/uploads/2021/12/Knife-65-Full-Tang-no-scale-MUK-Copy.jpg)
Then I just continued to use up the piece of metal. Right now it's heat treated and in the tempering oven. In looking through potential handle materials, I found this whitetail leg bone. It seemed like an interesting concept so I decided to try it. Dug out a little piece of brass to close off the leg bone. I'll just be epoxying it tougher.
(https://www.diy.timetestedtools.net/wp-content/uploads/2021/12/Knife-66-Leg-Bone-Muk-2.jpg)
(https://www.diy.timetestedtools.net/wp-content/uploads/2021/12/Knife-66-Leg-Bone-Muk-1.jpg)
We'll see how it comes out!
Happy New Year. Wishing for a great 2022 for you all!
-
Looks nice
Don did you build your own forge and burners? I've used a coal forge for years I bought a propane one but the burners won't burn right.
-
Looks nice
Don did you build your own forge and burners? I've used a coal forge for years I bought a propane one but the burners won't burn right.
Here is my build
https://www.diy.timetestedtools.net/2699-2/
As you will read if you go through my build, I did make my burners but I would not do it again. Zoeller sells burners, they would not cost much more (if any more) than the parts, and would safe a whole lot of aggression.
-
now to just let the epoxy dry and finish polishing the handle
(https://www.diy.timetestedtools.net/wp-content/uploads/2022/01/Knife-66-Leg-Bone-Muk-3.jpg)
(https://www.diy.timetestedtools.net/wp-content/uploads/2022/01/Knife-66-Leg-Bone-Muk-4.jpg)
-
I like that color. Nice knife.
-
Super cool knife....Paul
-
There is more pictures and video on my website https://www.diy.timetestedtools.net/leg-bone-muk-knife/
(https://www.diy.timetestedtools.net/wp-content/uploads/2022/01/Knife-66-Leg-Bone-Muk-6.jpg)
-
Very nice work , beautiful knife and that’s my kind of handle. Pappy
-
🤌🏼🤌🏼🤌🏼
-
I like the blade shape and the leg bone is a perfect fit.
-
Very nice. I like the color from the forge.
-
That came out really lovely; the lines and curves all work together graciously.
-
Looking good.