Primitive Archer
Main Discussion Area => Bows => Topic started by: Rowan Bows on March 23, 2022, 05:06:53 pm
-
Hello Dear Firewood Crafters!
In order to get rid of my bordom caused by quarantine
I decided to improve my Molli Skills in the garden 😁: https://www.youtube.com/watch?v=G4O2flUpoL0
- Elm Recurve Møllegabet 48#@27"
- Heat treated + Linceed oil
- Heat treated levers after steaming while in form to prevent reversing
- 62,5" ntn unstringed
- 61" ntn Stringed
- Danish Oil finish
-
wait for it...
-
ok 😁
-
Wow, what a beauty. That's one of my dream builds, right there. Beautifully done.
-
Thnx man, these are the dimensions before the recurves
-
Man I wish I could get my hands in some elm. Looks like some good stuff. Well done. Beautiful piece of art.
-
Thnx mate! good elm gets rare here. Cause of fungus many elms are cut now to prevent spreading but sometimes youre lucky and get staves which are clean. But elm can take a lot of stess its the mainly used wood since the stoneage with yew
-
This bow has very nice lines, aesthetic angularity. Very cool.
-
Very cool! Love everything about this bow
-
Yes sir, really liking the looks of that one.
Nice pictures to.
Bjrogg
-
Looks great. Definitely a challenging design. How much do you think you pushed the lateral stability with the narrow recurves?
-
Ryan I hope I get the question right. You mean how much the recurves got back from steaming until finish with shooting? I think they have the same curve as before. I heat treated them right after the steaming they were still in the steaming form. I harden them this way and they never go back at least not much. while HT I coat them with linseed oil. My believe is: cells shrink and get coated at the same time - no chance for moisture. then I wait 2-3 days
-
I think Ryan was asking if your tips have any problems with twisting to the side when drawn, since they're so narrow. I was wondering the same thing. Such a beautiful design to look at. I want one!
-
yes ok I know what you mean. that problem is always a case. I solved that by leaving the levers quiet wide until I can take a full draw. Im thinning out the levers just in the finish while the bow is stringed and then I get the perfect angle. Im making my flat spots up to the nocks (cant sand them while stringed of course) unstring the bow and continue sanding these flatspots just the way they are.
after I got my cubic lever I string it again and look if everything is straight while drawing. then I round it up. these fine tunings I do with a sanding machine cause good bow woods often split easily. I messed a few levers with the drawing knife so.. forgive me this craftingship but its the savest way I think. so: no these levers are straight in line also in full draw 😎 but I know its tricky
-
whole bow stringed
-
Love it. Very nice looking bow. What’s speeds you getting out of this bow? I made one almost exactly like this out of hickory. Very similar actually. Nice tiller too. Very well done. I hade to put a small string groove in the upper part of the levers on the string side. Other option for me was to use large loops and strattle the lever instead. Anyway. Nice bow
-
yes the narrow levers are a problem with the string. I made a string with wider loops and just a smal knock on the tip overlays and slightly into the wood. Didnt scale it but I sure its fast. First shots went all over the target on 30m 😂. in every case it feels faster than my last molle with 175fps 10gpp that was much longer ash without recurves.
-
I like Mollegabet, i like recurve and elm .... this one is such an eye candy :BB
-
a very well done moellegabet 3000 :)
-
I feel honored but no comparison to yours Sir 😁
-
I like Mollegabet, i like recurve and elm .... this one is such an eye candy :BB
Same here!
-
very nice bow.. clean.. gut
-
Video from Build finished:
https://www.youtube.com/watch?v=G4O2flUpoL0
-
Looks great!
-
congrats rowan bow!!!
loved the video too.
ach ja und nichts geht über ein "Sterni" ;) - cheers