Primitive Archer
Main Discussion Area => Muzzleloaders => Topic started by: Eric Krewson on April 30, 2022, 06:32:15 pm
-
I am getting the parts together for a TN bear pistol build, this is going to be a long drawn out build with me doing everything. I plan to forge my mounts, I have a forge but never used it and don't know how but I have a friend close by that is very good at it and can help me along.
A bear pistol has a 15" barrel, I have the stock blank, a highly figured piece of curly maple.
(https://i.imgur.com/gWvjxJD.jpg)
I got the lock in today, a Kibler lock similar to a late Ketland, I have to say this lock is made like a fine swiss watch. The gold standard of locks is a Roller lock, I happen to have one, this lock is right up there with a Roller.
(https://i.imgur.com/IVY6hJB.jpg)
Waiting on the barrel from Charles Burton at FCI barrels, it will be a swamped .50, 15" long.
-
Have fun! That is fine looking lock and stock!
Hawkdancer
-
I have been wanting to build a bear pistol for years!!!
-
Charlie Burton at FCI Barrels sells a swamped 15" pistol barrels for $135 which sounded real reasonable to me, he was at the Alabama Kentucky rifle show so I just had to order one. He said it would be up to six months on delivery because he had to get enough orders to make a run of the barrels, I suspect it may be longer.
-
Eric,
What caliber are you going to build?
-
.50 just because it will have less recoil than a .54, about a 50 grain lighter ball.
-
It has been 6 months since I ordered the barrel, still waiting........
When I ordered the barrel Mr. Burton could barely walk because of severe back problems, that may be something else he is dealing with now.