Primitive Archer
Main Discussion Area => Bows => Topic started by: 1/2primitive on September 11, 2008, 09:45:52 pm
-
I haven't posted a bow here in a while, mostly because I was having a bit of trouble with the pictures.
Anyway, here is a bow that I made sometime last year, but, like most of my bows, it got modified. ;D I had been wanting to make a bow using the tie-on nocks descibed in the Bowyer's Bible, Vol. 2, and this one drew the short straw. ;)
I ended up cutting it down from 60" to about 57" ntn. It now draws a round 50lb@27", and shoots rather well, despite it's slightly excessive set. The tips of the bow were tapered to a point (though not too small, because cedar is not a very dense wood), and an extra long string was tied onto both ends. It works great, and was very simple to do.
Pics of the tips to come.
Here it is, hope you like it. :)
Sean
[attachment deleted by admin]
-
Looks Good Sean....I like Cedar....got losts of Spring to it....even thiough it will take a bit of Set..
-
Nice job Sean.
-
Here are the tips.
Sean
[attachment deleted by admin]
-
Outstanding bow! Great tiller. Jawge
-
I sure don't see nothin wrong with that Sean - like George said outstanding :)! Tiller is spot on - and love that quiver full of arra's ;D. I see your still using the same armguard and glove (like me ::))- Bass pro, or Cabela's?
-
Very nice cedar bow Sean.My last attempt with cedar was looking great to 20",then KABOOM!!.It went off like a pistol in my shop.Great job on the tiller too!! God Bless
-
Nice work!
-
Great little cedar sapwood bow Sean. I've seen two and was impressed by both. Got one in my future!!! 8) Pat
-
Looks good to me,nice tiller .Well done. :)
Pappy
-
Really nice D bow sean, Tiller is excellent :)
-
really nice tiller on this bow!
frank
-
Great job on a challenging wood, turned out really nice! :)
-
Sweet bow! Looks like a good meat-maker to me.
-
Thank you for the kind words. It is a pretty nice bow, but I've got a new favorite. I'll post it in a couple of days. :)
Sean
-
Sean, How big was the stave you made this bow with? It looks like it came from a small diameter tree. Pat
-
Good looking bow Sean, tilller looks great. I like the looks of that cedar.
Alan
-
Nice bow there Sean. Justin
-
Thanks again, guys.
Pat, the branch (it was from a tree that branched out near the ground, leaving a double forked tree) that it was from was about 3" in diameter. Maybe a little bigger. So no, it wasn't very large. I split it in half, and this was the cleanest piece.
Sean
-
Primitive! That's what I like. Nicely done and a Very nice candidate for Sept Self Bow of the Month!