« previous next »
Pages: [1]

Author Topic: trade point run!  (Read 5100 times)

0 Members and 1 Guest are viewing this topic.

Offline Wolfsongforge

  • Member
  • Posts: 53
  • My name is Kenneth, and I am a bladesmith
trade point run!
« on: August 11, 2010, 02:59:02 pm »
Well i am finishing up with the last kitchen knife that people have ordered( justin, yours will be  in the mail with the other knife tomorrow morning)
So there was some orders for trade points. I have to make 3 Dz. BUT it is as easy once i am in production mode to make 9 DZ as it is  3Dz.

So if any one wants any let me know. They are made of 15N20 a nickle bearing steel, that has bout 70 points of carbon. so a great over all steel. I will temper then to bout 52 so they wont break nor bend if they hit a hard object but will keep a good edge. i will polish the edes and leave the center rough from the forge.
If ya wanna Dz or so let me know and we can work something out.

God Bless
Kenneth
Logged

Offline John K

  • Member
  • Posts: 1,936
Re: trade point run!
« Reply #1 on: August 11, 2010, 03:16:52 pm »
Pm sent
Logged
The only way to fail is to never start !

Offline Wolfsongforge

  • Member
  • Posts: 53
  • My name is Kenneth, and I am a bladesmith
Re: trade point run!
« Reply #2 on: August 11, 2010, 10:09:56 pm »
this one weighs in bout 175-185 according to how high i take the grind up to the center.
this is just a basic shape it is 1'' at the widest   and 2'' long



God Bless
Kenneth
Logged

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: trade point run!
« Reply #3 on: August 12, 2010, 01:39:48 am »
Kenneth, I'm interested in a few dz.
Logged
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.

Offline Catahoula

  • Member
  • Posts: 222
Re: trade point run!
« Reply #4 on: August 14, 2010, 10:18:41 pm »
Kenneth,

You interested in a NA Style flute?

Rand
Logged
“You only live once, but if you do it right, once is enough.”― Mae West

Offline Wolfsongforge

  • Member
  • Posts: 53
  • My name is Kenneth, and I am a bladesmith
Re: trade point run!
« Reply #5 on: August 16, 2010, 09:25:29 pm »
yes i would love a flute! i had one  made by ken light, but my ex took it. i have been looking for a low octave 5 hole. or a low e drone flute. if ya can do either one let me know!

God Bless
Kenneth
Logged

Offline Wolfsongforge

  • Member
  • Posts: 53
  • My name is Kenneth, and I am a bladesmith
Re: trade point run!
« Reply #6 on: August 16, 2010, 09:26:47 pm »
OH almost forgot. i got 6 dz cut out and they will be heat treated tomorrow morning. so if everyone that ordered some. could ya PM me you address so i can get them out.

thanks
God Bless
Kenneth
Logged

Offline Catahoula

  • Member
  • Posts: 222
Re: trade point run!
« Reply #7 on: August 17, 2010, 12:22:20 am »
Hi Kenneth,

Can do either...it will be a few months before I do any drones as my shop is a mess and I concentrate on my branch flutes...do have E's but just the average E and not any really "bass" flutes...those bass rascals can throw you some curves.  Can you send me an email with the approximate value of a dozen points?  I would need to balance the swap with an appropriate flute.  Note: My tuning is standard NAF style mode 1 and 4 (tuned digitally not "Grandfather") and is not like Ken's as he has his own style of tuning.(Not to say anything negative about his tuning...it is just a different style)

Rand
(you can see a few of my flutes at Catahoulaflutes.com...none of which are for sale...)
Logged
“You only live once, but if you do it right, once is enough.”― Mae West

Offline Juan

  • Member
  • Posts: 3
Re: trade point run!
« Reply #8 on: August 23, 2010, 01:44:56 pm »
e-mail sent
Logged

Offline Wolfsongforge

  • Member
  • Posts: 53
  • My name is Kenneth, and I am a bladesmith
Re: trade point run!
« Reply #9 on: August 31, 2010, 03:30:01 pm »
guys the first 5 dz wa sent out today. i will be sending the rest out over the next 2 days. when ya get em . i hope ya like em!

God Bless
Kenneth
Logged

Offline sharpend60

  • Member
  • Posts: 355
Re: trade point run!
« Reply #10 on: August 31, 2010, 05:22:43 pm »
Do ya have anymore trade points hanging round?
I'd like to trade for some if possible.
Logged

Offline Catahoula

  • Member
  • Posts: 222
Re: trade point run!
« Reply #11 on: September 01, 2010, 10:35:33 pm »
Hi Kenneth,

Forgot to mention...if you want to turn a six hole into a five hole just cut a strip of leather and wrap it over the fourth hole up.:)

Rand
Logged
“You only live once, but if you do it right, once is enough.”― Mae West

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,529
Re: trade point run!
« Reply #12 on: September 02, 2010, 12:27:12 am »
...or you can use a piece of masking tape!  ;D
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Catahoula

  • Member
  • Posts: 222
Re: trade point run!
« Reply #13 on: October 23, 2010, 09:51:02 pm »
Hi Pat,

Yep....maskey tape will get 'er done!:)

Keep it in the road!!,

Rand
Logged
“You only live once, but if you do it right, once is enough.”― Mae West
Pages: [1]
« previous next »