« previous next »
Pages: [1]

Author Topic: water proofing sinew backed hide glued bows  (Read 2017 times)

0 Members and 1 Guest are viewing this topic.

Offline bucksbuoy

  • Member
  • Posts: 116
water proofing sinew backed hide glued bows
« on: November 13, 2010, 04:38:03 pm »
I know this is on the verge of impossible but I was wondering if anyone had acheived this without comprimising the hide glue. I was thinking of trying that cheap shoe water-proofer spray. Essentially its just a wax solution. Any thoughts?
Logged
Its only wood

Offline JW_Halverson

  • Member
  • Posts: 11,878
Re: water proofing sinew backed hide glued bows
« Reply #1 on: November 13, 2010, 05:33:46 pm »
There's a great all natural answer to your problem....snakeskins. 
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline bucksbuoy

  • Member
  • Posts: 116
Re: water proofing sinew backed hide glued bows
« Reply #2 on: November 13, 2010, 06:08:08 pm »
hahahahaha!!! JW I have a "pet" python and lets just say he is not very nice. And I cant say I havent thought about tanning his butt.
Logged
Its only wood

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: water proofing sinew backed hide glued bows
« Reply #3 on: November 13, 2010, 06:13:23 pm »
No need to tan, snakeskin goes on as rawhide.  That's what I use as well.

George
Logged
St Paul, TX

Online Pat B

  • Administrator
  • Member
  • Posts: 37,526
Re: water proofing sinew backed hide glued bows
« Reply #4 on: November 13, 2010, 07:04:29 pm »
You will never completely eliminate moisture from entering your bow. A bow built with natural materials will gain and loose moisture as the R/H goes up and down. Waterproofing will not eliminate this but it can slow down the rate of exchange and repel rain. Any good finish will repel rain but none will eliminate moisture uptake.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »