« previous next »
Pages: [1]

Author Topic: bow forms  (Read 5350 times)

0 Members and 1 Guest are viewing this topic.

kurogane_84

  • Guest
bow forms
« on: July 05, 2012, 07:19:04 pm »
Hey all, im looking for some pics of bow forms for reflex deflex, making laminated bows and i cant find any good ones, and i really do not know how to make the laminated bow forms, any advice??
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,525
Re: bow forms
« Reply #1 on: July 10, 2012, 02:23:25 pm »
You can get blueprints from Bingham Products. A lot will depend of the amount of reflex and deflex and the length of the bow.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Flatlander

  • Member
  • Posts: 11
Re: bow forms
« Reply #2 on: July 15, 2012, 06:55:37 pm »
i used a leaf spring  ,centered everything up   traced it  on to nice straight 2x6   ,cut with band saw   one inch  clamp holes      also you could look at   poor folks bow building ;)
Logged

kurogane_84

  • Guest
Re: bow forms
« Reply #3 on: July 15, 2012, 11:35:27 pm »
Quote from: Flatlander on July 15, 2012, 06:55:37 pm
i used a leaf spring  ,centered everything up   traced it  on to nice straight 2x6   ,cut with band saw   one inch  clamp holes      also you could look at   poor folks bow building ;)

HAHAHHA never thought of a leaf spring, when i worked on trucks they launched out of the tabs, and i had the weight taken off of them LOL

and ill look at poor folks bow building
Logged
Pages: [1]
« previous next »