« previous next »
Pages: [1]

Author Topic: Help with Tree I.D.  (Read 2169 times)

0 Members and 1 Guest are viewing this topic.

Offline BowJunkie

  • Member
  • Posts: 283
Help with Tree I.D.
« on: June 21, 2011, 01:15:49 pm »
Anyone know what kind of wood this is?
Too long and too straight to pass it up.
Logged
Johnny
in Texas

Offline BowJunkie

  • Member
  • Posts: 283
Re: Help with Tree I.D.
« Reply #1 on: June 21, 2011, 01:18:00 pm »
Also the leaves.... Broad Heart shaped leaves, fuzzy on both sides.
Logged
Johnny
in Texas

Offline okie64

  • Member
  • Posts: 1,134
Re: Help with Tree I.D.
« Reply #2 on: June 21, 2011, 02:10:51 pm »
Just going off the pics I'd say mulberry, hard to say though.
Logged

Offline BowJunkie

  • Member
  • Posts: 283
Re: Help with Tree I.D.
« Reply #3 on: June 21, 2011, 02:53:30 pm »
Here is pics of the leaf
Logged
Johnny
in Texas

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Help with Tree I.D.
« Reply #4 on: June 21, 2011, 03:04:31 pm »
The bark is very young mulberry-esk, but of course if there's no orange on the inside then it's probably not.
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline Mangeur de lard

  • Member
  • Posts: 102
  • Wildlife biologist and arborist
Re: Help with Tree I.D.
« Reply #5 on: June 21, 2011, 03:09:00 pm »
I'm pretty sure it's striped maple (acer pensylvanicum). It does usually grow straight and free of knots, albeit a bit rapidly. Medium to low density, could make a low-medium poundage bow if left wide and long.

Hope it helps!
cheers
Matt
Logged
Quebec, Canada

Offline turmoiler

  • Member
  • Posts: 105
Re: Help with Tree I.D.
« Reply #6 on: June 21, 2011, 03:30:10 pm »
It is Broussonetia papyrifera "paper mulberry":

http://en.wikipedia.org/wiki/Paper_Mulberry

It's an invasive tree from china, osage family but without heartwood. Never tried as bowwood but some years ago I cut a small tree and it cracked badly.
 
Logged
Pages: [1]
« previous next »