« previous next »
Pages: [1]

Author Topic: chaseing a ring  (Read 1387 times)

0 Members and 1 Guest are viewing this topic.

Offline Ghost308

  • Member
  • Posts: 36
chaseing a ring
« on: September 11, 2013, 08:22:54 pm »
Hi Guys
I don't really get on here but I read everything on bows , I have one question ,,,,,,,,,, can you chase a ring on hickory ?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,525
Re: chaseing a ring
« Reply #1 on: September 11, 2013, 08:28:04 pm »
Ghost, you can but it can be very tedious. Most of the hickory that grows around my place has thin rings. I've seen it with thicker rings and that wouldn't be so bad.
 With thin ringed hickory I'd do the best I could to get to one ring and back it with rawhide if I was concerned.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Dvshunter

  • Member
  • Posts: 1,399
Re: chaseing a ring
« Reply #2 on: September 12, 2013, 12:10:55 am »
I chase a ring on all my hickory bow because I have never been able to peel off the bark. Its not to bard. Spring growth is spring growth no matter the wood most of the time. It just seems safer to me. Like pat said though, if its thin go for rawhide backing.
Logged
"There is a natural mystic blowing through the air; if you listen carefully now you will hear." Robert Nesta Marley
Pages: [1]
« previous next »