« previous next »
Pages: 1 ... 3 4 [5]

Author Topic: Sinewed bow  (Read 11325 times)

0 Members and 1 Guest are viewing this topic.

Offline PatM

  • Member
  • Posts: 6,737
Re: Sinewed bow
« Reply #60 on: July 18, 2017, 12:10:44 pm »
I'd work on it a bit before  resorting to shortening the curves.  Are you using a timber hitch by any chance?
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Sinewed bow
« Reply #61 on: July 18, 2017, 12:14:50 pm »
No I made a double loop string.
Logged

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Sinewed bow
« Reply #62 on: July 18, 2017, 07:59:50 pm »
yes I think you almost got it,, just fine tune the curves,,
leave it strung quite a bit, if will help hold it straight,, it wont hurt it to leave braced for hours at a time,,
great performance,, congrats on a great bow,,  (-S
Logged

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: Sinewed bow
« Reply #63 on: July 18, 2017, 08:05:02 pm »
How deep are your string grooves? I'm sure you've considered this, but I've had trouble with the string slipping and once or twice simply deepening the grooves did the trick.
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline DC

  • Member
  • Posts: 10,396
Re: Sinewed bow
« Reply #64 on: July 18, 2017, 08:28:34 pm »
Quote from: upstatenybowyer on July 18, 2017, 08:05:02 pm
How deep are your string grooves? I'm sure you've considered this, but I've had trouble with the string slipping and once or twice simply deepening the grooves did the trick.

Actually I had just redone the string nocks just before it came off this last time. I just redid them for pretty a few minutes ago and the were kind of slipshod. They're better now. I am finding that I can heat the limbs enough to get them to stay in the new spot. Just enough heat to move it and then aim a fan at it. Now I get to shoot it for a while.
Logged

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Sinewed bow
« Reply #65 on: July 18, 2017, 09:06:29 pm »
 :OK
Logged
Pages: 1 ... 3 4 [5]
« previous next »