« previous next »
Pages: [1]

Author Topic: Thinning Bamboo Backing on both sides  (Read 1024 times)

0 Members and 1 Guest are viewing this topic.

Offline Tommy D

  • Member
  • Posts: 342
Thinning Bamboo Backing on both sides
« on: January 27, 2011, 08:44:35 am »
Will a bamboo backing work if it is thinned on both sides - or will it just lift a splinter at the back? I have seen in TBB where they advise making bamboo bows with the and tillering the back (the inner side of the bamboo) so was wondering whether this would work?
Logged

Offline tattoo dave

  • Member
  • Posts: 1,543
  • Rockford, MI
Re: Thinning Bamboo Backing on both sides
« Reply #1 on: January 27, 2011, 09:21:43 am »
I made an all bamboo bow. I sanded the nodes off on the belly side piece, but was advised to not touch the nodes on the backing strip. to be honest, I'm not sure why, but it worked and the bow shoots great. Good luck.
Logged
Rockford, MI

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,520
Re: Thinning Bamboo Backing on both sides
« Reply #2 on: January 27, 2011, 10:46:54 am »
The strength of a bamboo backing is in the power fibers just at and under the outside surface. If you remove those power fibers the boo becomes weaker and could easily lift a splinter.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »