Author Topic: tung-oil  (Read 2367 times)

0 Members and 1 Guest are viewing this topic.

Offline Blacktail

  • Member
  • Posts: 1,432
tung-oil
« on: May 04, 2011, 03:55:37 am »
if you was going to use tung-oil how many coats would you put on for a good seal..john

Offline bubby

  • Member
  • Posts: 11,054
Re: tung-oil
« Reply #1 on: May 04, 2011, 07:14:30 am »
I usually do 5 coats min., rubbed on with a cloth, then between coats hit it with 0000 steel wool to nock down the bumps, Bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Blacktail

  • Member
  • Posts: 1,432
Re: tung-oil
« Reply #2 on: May 04, 2011, 02:23:40 pm »
o.k. thanks its the first time trying it..i like it alot its pritty easy and will last long than a spray...john

Offline bubby

  • Member
  • Posts: 11,054
Re: tung-oil
« Reply #3 on: May 04, 2011, 03:24:18 pm »
I actually prefer tru-oil, sometimes tung oil takes forever to dry,but they are both great finishes, Bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,621
  • Sorry Officer, I was just gathering "materials".
Re: tung-oil
« Reply #4 on: May 04, 2011, 04:46:41 pm »
Tung oil doesn't seal as well as shellac or varnish, even with 3 or 4 coats.  Like most drying oils, a good rule of thumb is one coat a day for a week, one coat a week for a month, and one coat a month for a year.
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline Steve Milbocker

  • Member
  • Posts: 447
Re: tung-oil
« Reply #5 on: May 04, 2011, 05:33:03 pm »
On my last osage I put 14 coats of Truoil. It looks like glass ;D
I'm no where near as smart as my phone!

Offline Blacktail

  • Member
  • Posts: 1,432
Re: tung-oil
« Reply #6 on: May 04, 2011, 08:49:33 pm »
wow,we have a little up and down on this....it looks like i might have to look into some thing else...i really like the way you apply it..john

Offline sailordad

  • Member
  • Posts: 5,045
Re: tung-oil
« Reply #7 on: May 04, 2011, 09:24:39 pm »
comercial tung oil like Homer formbys is all i use on bows
if applied properly and after several coats it is a very weather resistant finish and durable too
i clean the wood well with acetone first,the first 3-4 coats i rub in with a lint free cloth,in the same fashion as waxing a a car
this helps it penetrate the wood cells
after about 4 coats i then apply a more liberal coat that is just wiped on
let dry completly,then qucik rub down with xxxx steel wool,wiped down with a lint frre colth to help remove steel wool dust
then another coat of tung oil,repeat as much as you desire
for me i usually go minimum of 9 coats,prefer 12-15
looks like high end furniture when finished
some say to shiney for hunting,i dont mind it though
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline grbd29

  • Member
  • Posts: 13
Re: tung-oil
« Reply #8 on: May 05, 2011, 11:56:44 am »
I like to use pure tung oil mixed with 50% mineral spirits (more mineral spirits if it isn't soaking in with in 40min to an hour).  I sand with 150 grit sand paper and no finer so it can soak in then steel wool before the last coat.  I like The Real Milk Paint Co. for pure tung oil and I use Dark Raw Tung Oil, it brings out the grain and isn't very dark. 
I am just finishing expanding my kitchen cabinets in our new house and I am building our counter tops with white oak hard wood flooring.  I am finishing it with dark tung oil since it creates an water barrier and is food safe.

see bow building helps out in our regular life with scraping and finish.

David
Floresville, TX