Author Topic: Virbinia greenstone celt (Read 1858 times)

Hunts with stone · « **on:** January 21, 2016, 09:24:41 am »

Thanks to Zuma for helping me get some tool stone for a few Adz and Celts. This is the first one I was able to get done . Hickory handle. Thanks Don!

455/Tris_Smith/ax%20adz%20celts/B9C9D004-BB31-4EC6-91E4-BAE7E619A8DA_zpsi6u2xoer.jpg[/IMG][/URL]

Pappy · « **Reply #1 on:** January 21, 2016, 09:51:19 am »

Very cool, I like that.

Pappy

DC · « **Reply #2 on:** January 21, 2016, 01:15:55 pm »

Is there a knot on the business end to help keep it from splitting?

nclonghunter · « **Reply #3 on:** January 21, 2016, 01:22:27 pm »

That's a bear beater if every I saw one!

Hunts with stone · « **Reply #4 on:** January 21, 2016, 07:50:35 pm »

Thanks all, it could keep most anything at bay. And yes there is a knot in the top end it just makes it a bit stronger. Most splitting occurres from no side clearance. Your celt bit should only be seated on the top and bottom.

Zuma · « **Reply #5 on:** January 21, 2016, 08:35:36 pm »

Nice work with the celt Glenn. Now let's see a six inch greenstone Clovis.

Zuma

Hunts with stone · « **Reply #6 on:** January 21, 2016, 09:17:50 pm »

Lol comming right up ground to prfection.

Primitive Archer