« previous next »
Pages: [1]

Author Topic: Another Molle question  (Read 1015 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Another Molle question
« on: March 28, 2019, 02:20:01 pm »
I've seen people suggest or ask about using Spruce as levers on a Molle. has anyone actually done this? I'm thinking it may be strong but will it bend? If I was to back it will it take compression?
Logged

Offline PatM

  • Member
  • Posts: 6,737
Re: Another Molle question
« Reply #1 on: March 28, 2019, 02:24:55 pm »
I have seen one example of a composite using Sitka Spruce. 
 
 As long as it is not bending much at all the compressive ability of the wood becomes less important.
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Another Molle question
« Reply #2 on: March 28, 2019, 02:33:41 pm »
Thanks Pat.I'll keep my eyes open. It's SG is about half that of Yew. Oh,but if I put a Maple or Boo backing on it I lose some of that advantage. Still :)
Logged

Offline PatM

  • Member
  • Posts: 6,737
Re: Another Molle question
« Reply #3 on: March 28, 2019, 04:55:05 pm »
You can taper the backing strip aggressively past the splice.
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Another Molle question
« Reply #4 on: March 28, 2019, 06:18:33 pm »
Was the spruce on the composite just used as a core, like with sinew backing and horn belly?
Logged
Pages: [1]
« previous next »