Author Topic: Kviljos mini warbow (new pics on page 3)  (Read 23627 times)

0 Members and 1 Guest are viewing this topic.

SimonUK

  • Guest
Re: Kviljos mini warbow
« Reply #30 on: July 12, 2007, 06:33:52 pm »
Hi, that's a fine bow Kviljo. The yew warbow has to be one of the best looking bows around.

It's 70 inches long yes? Won't there be a risk of inducing a lot of set if you draw it to 30? My very first bow was also a 'mini' english yew longbow, even shorter than yours at 60 inches! I drew it to about 27 inches and got a lot of set. The wood wasn't very well dried though.

Offline Kviljo

  • Member
  • Posts: 488
  • Archaeologist, Antitheist
Re: Kviljos mini warbow
« Reply #31 on: July 12, 2007, 07:47:39 pm »
It's closing in on 2" set now, with a little natural set. I've drawn it to 29" on the tiller, if I remember correctly. But I don't think I will be able to draw it much further than 30" before I have made a new and longer yew bow :)

Didn't Jaro show pictures of his 69" 90# bow beeing drawn 32"?

duffontap

  • Guest
Re: Kviljos mini warbow (new pics on page 2)
« Reply #32 on: July 13, 2007, 01:49:07 pm »
I think Jaro draws 30-31".  Maybe he'll chime in. 

           J. D.

Offline Kviljo

  • Member
  • Posts: 488
  • Archaeologist, Antitheist
Re: Kviljos mini warbow (new pics on page 2)
« Reply #33 on: August 26, 2007, 03:40:24 pm »
Okay, I won't draw that far in a while anyway :)
Although I adjusted the bow slightly yesterday. Some small adjustments on the tiller, narrower tips (from 15 to 12mm) and new side-hornnocks.

I checked my weights, and now, with a 4" stringheight (measured from the back), and 2" stringfollow, it draws 85# at 27" and 91# at 28". Should be 103# at 30 when I get there some day ;)

The new sidenocks work like a dream by the way, not a sign of the string wanting to slip at all.





SimonUK

  • Guest
Re: Kviljos mini warbow (new pics on page 3)
« Reply #34 on: August 26, 2007, 05:25:40 pm »
I like the nock Kviljo, nice and simple. How long is the taper inside it?

I've just drilled holes 2 inches long inside my nocks. Now I realise that when they are fitted, the nock to nock length of the bow will reduce by about 3 inches  :( I wish I'd made the taper a bit shorter now.

JD how long do you make the holes in your nocks?

Offline Kviljo

  • Member
  • Posts: 488
  • Archaeologist, Antitheist
Re: Kviljos mini warbow (new pics on page 3)
« Reply #35 on: August 26, 2007, 08:16:09 pm »
It goes about 5-6mm higher than the sidenock, so the wood goes just under an inch into the horn.


Offline bow-toxo

  • Member
  • Posts: 337
Re: Kviljos mini warbow
« Reply #36 on: July 15, 2008, 11:44:20 pm »
Thanks :)

I've changed the tiller a bit, and that made it 65# at 20", which should progress into 120 at 30.

Do you think it will live through a 30" draw?
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mediaeval and Tudor period standards for bow length were ; twice the arrow length plus two palm widths. For a short lived fiight shooting bow, one palm width less.

Offline Kviljo

  • Member
  • Posts: 488
  • Archaeologist, Antitheist
Re: Kviljos mini warbow
« Reply #37 on: July 16, 2008, 09:38:09 pm »
The bow survived beeing drawn 28", but I won't test it for 30" as it has followed the string enough.
« Last Edit: July 16, 2008, 09:44:06 pm by kviljo »