Author Topic: Ipe bows  (Read 3037 times)

0 Members and 1 Guest are viewing this topic.

chuckcolas

  • Guest
Ipe bows
« on: February 01, 2009, 03:31:49 am »
Howdy all, I am new to this forum and new to primitive archery!  Can you guys tell me what you think of Ipe bows?  I just bought a hickory backed Ipe bow from Pacific Yew Longbows.   I can't wait to shoot it.  Appreciate any advice.  Thanks,  Chuck

Offline Cooper

  • Member
  • Posts: 169
  • "I believe in … surprise"
Re: Ipe bows
« Reply #1 on: February 01, 2009, 07:54:07 am »
I made bows with ipe - primarily with bamboo-backing.
But I just finished one with a hickory-backing. It works very well.
In my opinion ipe is one of the best belly-woods you can get.
Niels Böttcher - "Cooper" (PA) = "Botjer" (FC+FA)
"If this day wasn't your friend it was your teacher …"

__________________
Hamburg, Germany

Offline adb

  • Member
  • Posts: 5,339
Re: Ipe bows
« Reply #2 on: February 01, 2009, 11:16:42 am »
Ipe makes awesome bows. It excels in narrow profiles, and is very compression strong. All the bows I've made with ipe have been backed with either hickory or bamboo. Don't worry, I'm sure you'll like your ipe bow!

Offline Kegan

  • Member
  • Posts: 2,676
Re: Ipe bows
« Reply #3 on: February 01, 2009, 04:16:26 pm »
I'd love to have some ipe to make itno some bamboo backed longbows. I've heard nothing but good things about it, and there was an article in PA by Rich Saffold not too long ago detailing his updated ipe success :)

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Ipe bows
« Reply #4 on: February 01, 2009, 05:06:14 pm »
I love Ipe.  The shortest bow I have ever made and the narrowest bow are both Ipe.
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline Coo-wah-chobee

  • Member
  • Posts: 2,503
Re: Ipe bows
« Reply #5 on: February 01, 2009, 06:42:24 pm »
Ipe is good wood. Its not only belly wood. Strong unbacked bows can be made out of it..........bob

Offline dragonman

  • Member
  • Posts: 1,142
    • virabows.co.uk
Re: Ipe bows
« Reply #6 on: February 02, 2009, 04:07:44 pm »
I made one ipe bow, and it was the fastest i've made so far and took no set , it appears to be a fisrt class bow wood
'expansion and compression'.. the secret of life is to balance these two opposing forces.......