« previous next »
Pages: 1 [2]

Author Topic: bow forms  (Read 13559 times)

0 Members and 1 Guest are viewing this topic.

Offline Scott E

  • Member
  • Posts: 32
Re: bow forms
« Reply #15 on: March 17, 2009, 10:20:06 pm »
Good stuff. I have yet to make any forms, but I got some good ideas from the pics.
Logged

Offline Kitsu

  • Member
  • Posts: 198
  • Räven bakom masken
Re: bow forms
« Reply #16 on: March 23, 2009, 03:11:46 pm »
i have a single 2x4 and i clamp the handle in the center, i also use a cinderblock or a few pieces of 2x4 to shape it out further
Logged
"If you open your mind for me
You won't rely on open eyes to see
The walls you build within come tumbling down
And a new world will begin" ----- Queensryche, "Silent Lucidity

R.H , Southeastern PA/Western PA.

Offline Knocker

  • Member
  • Posts: 271
  • Tumwater, Washington
Re: bow forms
« Reply #17 on: March 24, 2009, 01:46:11 am »
Here is mine.  It is made of pine board sandwiched in plywood for strength.  I made it large, so I still have another full side for a different profile, and 3 more corners for different curves.  I hooked a light pull bungee to the bow and let the heat gun soften a few inches at a time untill the bungee brought the bow down. 

Keith

[attachment deleted by admin]
Logged
If ye love wealth better than liberty, the tranquility of servitude
better than the animating contest of freedom, go home from
us in peace. We ask not your counsels or arms. Crouch down
and lick the hands which feed you. May your chains set
lightly upon you, and may posterity forget ...

Offline redwasp

  • Member
  • Posts: 222
Re: bow forms
« Reply #18 on: March 25, 2009, 08:22:40 pm »
I learned something from that. Great thread and thanks everyone for sharing. Hope you dont mind if I use some of these. ::)
Logged
If one man can do it, another man can do it. Richard......Northeastern PA.
Pages: 1 [2]
« previous next »